Thanks for the info. So for the most recent images I posted of pre facelift side mirrors would you say they are power fold? I have requestion a picture of the mechanism behind the mirror but I've got nothing yet. But looking at the wiring it looks as they are power fold however I don't want to...
The door modules I have are power folding. However my side mirrors aren't power folding even they were sold as that. I have images of another pair with the image below is the wiring. Are these power folding? They do that the blue and pink wiring.
Sent from my ONEPLUS A5010 using Tapatalk
These are the wiring for both side mirrors. I was sold these as power folding. I'm going to be running if that's not the case.
Sent from my ONEPLUS A5010 using Tapatalk
Yes this is what I saw but I believe mine are high spec due to the white filled block on top right.
Didn't get a chance to check wires today will look in the morning and confirm. I'll take some pics
Sent from my ONEPLUS A5010 using Tapatalk
So the modules I purchased aren't folding? I saw online a few people mentioned that the LL and RL need to be filled white and not half which shows they are power fold.
Sent from my ONEPLUS A5010 using Tapatalk
To get to the mirror bases would I need to remove the casing of the side mirror? I have tried to do this previously but was unsuccessful.
As for module pins. I have compared to old modules I had and they have many more pins for the mirrors.
Sent from my ONEPLUS A5010 using Tapatalk
I purchased door modules that have the solid block for LL and RL on top right of module. Where will I find the wiring that you mention?
Sent from my ONEPLUS A5010 using Tapatalk
Hi,
I have installed power folding mirrors on my vehicle, the side mirrors are power folding, i have the 4 position switch and the door modules for power folding. I have also coded the vehicle to show power folding mirrors installed. However they don't work. I have selected them to fold when i...
Just looking for some advise on exhausts for my A4 1.8T B8. All i want is to have a deeper sound to the car and no cracks or bangs. Im not looking for any performance gains as my remap will be enough for me.
I have thought about the rear muffler delete but not sure if this would give the drone...
Yes i have read with regards to piston and piston ring failures. The car has been good to me and uses very little oil and its my daily runner. Ive only had the car for 8 months but it runs just fine.
one of the companies ive used before is CCTuning and they carry out a pre-engine health check. I only ever use the best stuff on the engine and parts and service it regularly.
Hi,
I have a Audi A4 B8 1.8T with 120k on the clock. i currently have 160bhp and want that extra bit of power through the rev range. I want to know if anyone has experienced any issues after stage 1 remap, because of the miles on the car i dont want to put extra strain on the engine and turbo...
I have followed those instructions and seems to be programmed fine. I have got an error of clutch position sensor G476 short to ground. Whether this is the reason for my cruise control not engaging?
Any ideas?
Sent from my ONEPLUS A5010 using Tapatalk
I have an Audi A4 B8 and i have retrofitted cruise control (8K0953568F), I have programmed in Engine 01 and Steering Wheel 16 however my cruise control does still not work.
Any help?!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.