I am currently using a catch-can and since the winter coming, due to short journeys my catch-can fill very quickly with a creamy blow-by. I came up with the idea to remove the catch-can then crankcase breather hose just redirect to the floor (venting to the atmosphere) and close another end to...
I have a strange problem with my AC and it's driving me crazy especially now during hot days. I can not turn on AC, compressor or fans not kicking on. The first thing I thought there is no refrigerant but after regassing still nothing changed. Next I checked the fuses and every fuse is working...
I want to install oil catch can on my 1.4 tfsi but I have difficulties to understand installation order. Please, can anyone help me? This is pcv system in my engine:
And this catch can I want to install:
So, I have one hose from air filter box attached to pcv valve and another hose...
https://soundcloud.com/user-565294897/14-tfsi-noise-with-clutch-pressed/s-fM93D
Can someone recognize this type of noise? It happens when I press clutch pedal and then gas pedal in short interval only on idle or from idle to first gear. I can hear it also without clutch pedal pressed but...
I need to replace cylinder head gasket on my 1.4 tfsi but I do not understand one thing, according to this picture:
Is it necessary to disassemble the chain or not?
A few weeks ago I got CEL and p0106 code. Also I noticed oil on air intake hose but only on the left side near turbocharger and on some hoses under the air intake hose. After that I cleaned outer part of that hose and replaced map sensor above the throttle body. Again, after a few days, p0106...
What is correct ressistance for o2 sensor heater? I got CEL with code p0141 - O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2). Than I replaced rear o2 sensor with new Denso DoX-0119 but problem is still there. I measured heater resistance and it is 7 ohms. Everything looks fine, sensor...
My a3 1.4 tfsi 2008 makes strange vibrating noises ONLY when turning to the right at speeds above 40 km/h. I already replaced both front wheel bearings, also switched wheels position front/rear and noise is still there. It is low-frequency noise/hum, similar sound produce rumble strip, something...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.