Search results for query: *

  1. H

    High mileage 2.0 TDI's! What does your odometer read?

    09 Facelift 2.0 TDI 170 - 201 k.
  2. H

    how do golf's get better mpg than audis with same engine

    This. Gearbox ratios is Audis seem to be shorter, which in turn are worse for mpg's. I have a 09 2.0 tdi 170. 6th gear on the motorway at 1800 rpm/63mph cruise control, I get 49-52mpg in winter and 52-56mpg in summer. My gearbox may need some work in the near future, and I am going to...
  3. H

    Clicking noise help

    True. Took it to my mechanic today and he said it sounds like some form of bushing is dry. MOT advisory for the past two years has been on both wishbones bushed being cracked but not causing excessive wear. Will have the bushes looked at properly. Gear changes are very smooth though. It just...
  4. H

    Clicking noise help

    Not sure if it would be a stone in the tyres as the fronts were replaced after the noise started and I checked all the tyres immediately after I heard the noise. CV joints may be a possibility, however no weird clunking noises can be heard on full lock which would indicate CV. Just had the mot...
  5. H

    Clicking noise help

    Hi, I have a 2009 facelift 2.0 TDI 170 s line manual 6 speed. The car makes a clicking noise at low speeds and when moving off and changing gears. Happens in 1st, 2nd and 3rd upto around 30mph. If I downshift into 1st under load around 15 mph, a horrible grinding sound occurs as the gear...
  6. H

    Retrofitter North West

    So where does the loom plug into? One plug goes into the control module, one plug is these for the buzzer. Then there are four remaining wires. One appears to be a ground, there are two exposed wires twisted together, and one wire with a with some form of small connector.
  7. H

    Retrofitter North West

    Hi, Are there any retrofitters in the North West area? I have an Audi A3 2009 facelift. I have bought a rear bumper with factory parking sensors which now need wiring in. Control module, wiring loom to to the front and buzzer have all been bought and needs fitting in. Thank you
  8. H

    bluetooth Q7

    Just my luck. Do you know anyone up here in the Bolton/Manchester area that can do it?
  9. H

    VCDS USERS MAP

    Hi, still no luck.
  10. H

    bluetooth Q7

    Hi Craig, I have come across you on the vcds user map. It states you are a retrofitter and vcds user. I have been trying to send you a message, however everytime I click your tag the send message option does not appear. If you see this message, is it possible for you to send me some contact...
  11. H

    VCDS USERS MAP

    I have tried that. The start a conversation option does not appear. It appears if I click on yours @Sandra. It seems he may have disabled it?
  12. H

    VCDS USERS MAP

    I have tried that. When I go to his member page, I can't see the option to send him a message.
  13. H

    VCDS USERS MAP

    Hi, I am looking for a retrofitter in the North West who can wire and code in rear parking sensors on a 2009 A3. I have come across a user @s8craig in on the VCDS user map which says he is a retrofitter, however I cannot find any way to get in contact with them. Does anyone have contact details...
  14. H

    Rear Parking Sensor Help

    Hi, I have a face lift A3 8p S Line. The front and rear bumpers have suffered from lacquer peel. I was looking to get it sorted and I came across a rear bumper in the same colour as mine with parking sensors with good paint. The bumper came with parking sensors installed with the loom...