Search results for query: *

Thanks AndrewW!

Hi lads, anyone kind enough to send me completely untouched stock map for s3 1.8t, AMK 210hp. Thanks in advance, Kind regards

Problem SOLVED!!!!! the issue was rear left caliper, the piston was 3-4mm away from the pad, and when you pressed the pedal in went soft until piston touched the pad, then it became hard( at the end of pedal travel) but there was no more room to press since the pedal was flat.... dont rly know...

i installed it dry and tried bleeding all together, this was advised me from Audi service near me...

Hmm, will check, but if the servo for brakes isn't plumbed right wouldn't that cause no servo help and hard pedal even if the engine is on?

will try this tomorrow, hope it works. What brakes are you using?

for unions u mean the output of abs to brakes?

HI... After my problem with brakes i have now another problem, my car does boost to 28-29psi, and pretty much holds 25psi... I dont rly know if my gauge went crazy or what, i wild check with vcds but need to sort of my brakes first... What would you recommend to check? i checked wastegate and...

can you walk me trough it on vcds pls? im lost totaly... can we go to private or maybe Facebook?

I have MC without nipples, its this style here: https://cdn.autodoc.de/thumb/?m=1&id=8175918&lng=en&ccf=21876012 I have bleed them with pressure bleeder several times, i tryed using vcds and did like 10x ¨step on pedal --->relese pedal open bleeding screws-->press pedal 10 times, close...

i need help with soft pedal not BBK advertising :P hehe

my MC does not have nipples on top... I used pressure bleeder i did try doing it with vacum too.

Hi, I just installed 4 pot brembos on my S3, will my MC hold up fine? piston size is 40mm, all 40 of them. no braking power out of them and the pedal is so soft and only brakes when oat the end, very porly thou... I bleede all 4 calipers couple of times, changed MC, and bleeded again but no...

Car is getting finished this week, loving the Mythos Black color!

will try diverter instead and see if there is any difference...

I was running atmospheric bov for half a year, didn't rly have problems, im curious if there is any loss of power with this kind of bov? My car did run and drive nice and smooth thou...

Its just mock up, its 3d printed model for test fit, real ones are being cnc machined atm.

Loaded and rdy to go! Choosing color is the next thing, thinking about Mythos black from Audi or Sapphire black from BMW...

as far as FMIC goes they havent seen it yet :p For the brakes, coillovers and exhaust all needs to have TUV certificates.

Thank you mate!