Pull the EGR connector and see if limp stops
Ah yes all new Orings from Audi are being replaced. All new front INA pulleys etc etc
In other news the pump fits after some grinding and bending...
Thanks for the feedback
Hi - what do you mean by deala?
Some progress on the replacement engine.
Pistons all cleaned up:
Piston installed with fresh...
Sounds like gearbox (s stronic issue) - what tool you using to check codes?
Hi - Best to mail me on BobbySinghRacing@outlook.com
If you need VZK hybrid for 430hp plus I have two units:...
Get a multi meter and measure the voltage
If you have a CVT auto just be grateful it can take stock power :)
Having said that I did tune my cousins 2.0CR with CVT and held power ok with...
Measure the voltage and follow the pin out above
Losing brake fluid haha :)
def not normal
You have any pictures?
They can break if the bolts have been reused more than once
Stick to the settings recommended
I've been working on a hybrid solution for sometime to cover the 3.0TDI with the newer style V6 engines from 2011 to 2015 - GTB2260VZK...
Nice times which turbo you use?
This was one of my first hybrid tunes and I have learnt since then. I would say a CAPA pump can make around 380hp / 800nm while staying within the...
Maybe the tune you have is smokey? try a map with just egr and dpf off.
Also, block the egr with a plate
Whoever you decide to use ask them some simple questions and you'll know who is feeding you rubbish.
1) What lambda are you aiming? this is...
Any turbo thats converted to vac if done incorrectly will be laggy. Plus set up of the stop screw is very important, half a turn can make a big...
Been a while since I've done much with the car.
Some maybe aware but I bought a used engine last year with ojective to rebuild it....
Separate names with a comma.