Never put a new MK7 platform on the dyno before but this one started off as a CR150 (DSG), now with 184 turbo and injectors.
Power band is small...
Years ago I done a 180hp 2.7 to around 265hp with 600nm plus but being FWD it was wasted imo - Still fast don't get me wrong and that doesn't mean...
Its been a lot of work especially for Paul traveling up and down - which I appreciate.
Car is very fast (gearing is perfect in these B7 manual...
Thanks - 6hp 19 with this torque would last hours. I can make these turbo's but I wouldn't want to get involved in another BV50 hybrid complete...
Hi guys here is my first high power BV50 project
Hybrid turbo (started life from Darkside and then I changed the spec)
Give the dealer the hardware number and ask them
Audi 3.0TDI CAPA
My own spec hybrid 2260
430hp / 840nm
A bit more smokey than I'd like so I pulled some...
We can either wait until the...
You turbo is now being worked on
I would look into SSP clutch pack already ;)
Maybe someone deleted the dpf from the map but physically left it inside?
I would put a standard map on, drive the car for while and then check...
Bill very good. You know the sample rate for logging with say 10 channels?
Can the ECU take a analog input to say monitor turbo shaft speed?
A update on this - The car returned to have my turbo fitted to see if the emp issue gets fixed however it still had the same problem.
Done 3 days...
Have you put a dpf delete pipe on with stock ecu map?
If the ecu decides to do a regen with no dpf you run the risk of bore wash.
ECU has gear selection input? maybe you can limit torque in lower gears to save drive train.
Karl this is really good work - that ECU looks great :)
Thanks Karl - The oil leakage is down to many factors which I now know about.
As you know I had 426hp from a hybrid in 2017 but the leaks meant I...
Hybrid turbo - BSR custom CW, AMG turbine
DPF gutted but still has CAT
You can't code out DPF - needs to be mapped out
Try a new map sensor if that doesn't work then wiring issue
Separate names with a comma.