I've just gathered all the parts to go from Symphony to RNS-E
However I've noticed my aerial/fakra adapter only has 1 connection (image attached)
When looking upon a few other RNS-E retrofits I have noticed a different adapter being used which allow for both the iso aerial to be...
Recently purchased a 2010 Audi S3 and for the life of me cannot get the coming/leaving home lights to work
They are both enable from within the DIS menu and I have also gone over the options from within VCDS and everything looks good but for some reason they just do not work?
I’d like to lower my audi a3 3.2 sportback.
I’ve fitted full s3 bodykit and 18” alloys, just need it sitting right now.
Ideally I’d like a drop of about 50mm.
I don’t want to break the bank but also don’t want any rubbish (had a set of JOM coilovers on my fabia vrs 1.4 dsg...
Been meaning to start this thread for a while but just didn't get around to it.
However have been collecting a few photos ready for when I did, so here we are!
Me and my brother are keen car enthusiasts and have owned a few Audi's in the past.
Have done a few little...
Have successfully fitted the facelift front end with bi-xenon headlights to my 2005 AUDI A3 3.2
Used the kufatec adapters with 2 extra wires running to the module in drivers footwell for bi-xenon shutter + DRL's.
I have also successfully coded using VCDS (Xenon headlights ticked...
Hi guys, been having an absolute nightmare with my 56 reg Audi Q7 3.0 TDi S Line
About 2 months ago I heard the compressor running even when the engine was off and eventually after a few hours heard a hissing noise (compressor burning out) and then the back end of the suspension dropped after...
I no longer own an Audi A3 :(
But have got a mk2 TT :P
Since the 8P thread is more active than the TT one i thought id ask here :)
Looking to wrap the side mirrors to get the TTS Stainless Steel Side Mirror look
Also considering wrapping the front lip same colour
I want the side...
So some idiot has decided to hit my car and drive off.
Couldnt get the full reg in time.
My question is, as my car has the factory fitted bi-xenon headlights with xenon washers, how would i go about fitting them to a new bumper?
Had a quick look on ebay and most bumpers come...
Managed to bag myself a S-Tronic Gear Knob from Audi A3 8V
When it arrived in the post the button was clicked in :eek:
But wasnt too difficult to click out once the gear knob was apart.
I know its possible to fit to an 8P as I have seen Nigel's (NHN) 2nd thread from which he...
I Have a 55 reg Audi A3 TDi S Line DSG
For the past few mornings when i start the car up (cold start) the coolant warning pops up on the DIS and beeps for a couple of minutes and then just goes off?
Doesn't come on again until the next morning when starting cold.
Is it just a sensor...
Just fitted the facelift led rear tail lights to my 2005 audi a3 sportback
All fitted and coded up well via vcds
Indicators, reverse lights, brake light, fog lamps ect all working fine
My only problem is that the inner led on the lamps on the tailgate are not working:
Any idea what...
Planning on changing my rear sportback bumper to a facelift one with the changeable lower splitter/valance.
Seen a bumper at a decent price not too far from me and it has the holes for the parking sensors, so i inevitably i started looking into parking sensors lol.
I understand a...
Wanting to change my steering wheel to a multi functional steering wheel.
I have a DSG Audi A3 so it has the paddle shifters.
This is my current steering wheel:
And a local breaker to me has an Audi Q7 MFSW for sale:
My question is: Will the airbag from my current steering wheel...
new to the forum and love how everyone is so helpful on here!
Just a quick question, I have an Audi A3 2.0L TDi S-Line DSG on a 55 Reg
The lower part of the front bumper looks different from S-Lines from 2006+
I was wondering is it just an clip on/bond on splitter or completely...