Double check the coding as mine has the steering input in the camera and the sensors view which is on the right of the screen.
Might be worth checking the connections to the CAN HIGH and LOW, not sure if they could cause the issue if the connections arent fully made.
Can you see the Camera...
These are the adaptations, just do the two 5F adaptations and apply them.
What are you using to make the changes? OBDEleven?
If you've made the two adaptation and you still aren't getting the steering input, are you certain you provided your VIN to the seller and ask for the camera to be pre...
Did you purchase the camera from the link I posted and ask the seller to code it to your VIN?
That's what mine was and then after the install I just did the two adaptations and all worked.
Sent from my SM-N960F using Tapatalk
Yeah correct that's the controller directly under the centre rear seat towards the back. Those pin numbers sound right but just double check the wiring diagrams from ErWin, do a search for J533 or rear reversing camera. It'll confirm the pin numbers and also the colours of the cables to all you...
There isn't a installation guide fro. Them just wiring diagrams, but just download everything they have on you vehicle so you can refer to it if needed, I found the wiring diagrams and the panel removals the most useful... oh and the car handbook for the correct fuse location if you are wiring...
Correct, provided the camera is coded your your VIN and your make the two code adaptations it shows the steering input with curved lines.
Sent from my SM-N960F using Tapatalk
Check out my other post, it has all the links for the bits I brought.
http://www.vwaudiforum.co.uk/forum/showthread.php?p=1103726
Mine is the A4 2017 B9 S-Line Black Edition with Tech Pack so same setup with MMI screen and VC.
Drop the Ebay seller a message win your VIN and he we confirm if...
I've finally finished the installation and all is working perfectly.
Sadly didnt manage to take pictures as I went along as I was battling against the weather.
But it was a particularly hard job, just fiddly and time consuming. But what helped was having the Erwin manuals for removing the...
Not if you get a camera already coded for your vehicle... I brought one from an Ebay seller who sent it pre coded, so I just need to wire up, and make the two adaptions
Sent from my SM-N960F using Tapatalk
These are the 5F Adaptations
Car function list BAP Gen2 -> VPS_0x0B
Change to Active
Car function list BAP Gen2 -> VPS_0x0B_msg_bus
Change to Terminal 15
Sent from my SM-N960F using Tapatalk
Thanks, after ready the wiring diagrams again that makes sense now.
Is there not another junction box where all co section go to those PINs? Looking at the wiring diagram, theres multiple connections to these ...
Sent from my SM-N960F using Tapatalk
I have just finished installing my rear view camera, I made two adaptations to control module 5F and the camera is working fine, however I've now got 4 faults which I can't clear and it seems that the Reductant Control Module is not responding... any ideas?
I installed to Pins 12 and 30 in the...
How did you set this up? Using coding? Or is it someone for the S4 / RS4?
I'd like to set mine up like this but have the speed signs on the right hand side if possible.
Cheers
Sent from my SM-N960F using Tapatalk
Will do my best to get pictures and do a write up which hopefully will aid anyone in future. Probably won't won't be for a few weeks, well at least until I've got the camera and loom
Sent from my SM-N960F using Tapatalk
No problem, I've paid for access to Erwin today and downloaded everything for my car, I'm now very confident with the installation.
Now just need to find the correct oem rear camera for my car.
Sent from my SM-N960F using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.