My experience is that I havent had much luck sourcing parts individually, specially wiring harnesses and price-wise you can either land very good...
Indeed, if you currently have OEM rear only parking sensors (5Q0 919 283 module on Address 10: Park/Steer Assist) you should already have the...
I believe they go into connector T73C on the onboard supply control unit (J519), minor coding is required to enable them.
I did change an airbag cover for a friend of mine, he had the 4 spoke steering wheel and got a deal on a 3 spoke with paddle shifters, so instead...
They came with the kit I bought, I believe I got it from Aliexpress, sadly don't recall the seller.
Hi, sorry for the delay I've been away for a while now; please find updated link:...
Mine was a saloon but it was just a matter of removing the 2 bolt nuts, uncliping the center clip and pushing from the inside while squeezing on...
It should just pop out by moving the tab (it will push against MMI and pop the quadlock): [ATTACH] Try to wiggle it a bit once the tab is moved...
Yes, for the sportback I believe it should be just above the wheel well [ATTACH] Not my image :)
Yes, they should fit just fine, the kit I installed a while ago did have the same connectors, I believe they exist just to simplify or have a more...
I dont believe I have (remember I did 8K sensors not 12K). Also you might be missing some coding as 12K PLA sensors do require to code some extra...
Yeah, PDC sensors won't come on if speed is higher than set on "switch off speed" setting: If both "park assist speaker" and "rear park assist...
Yes, Im able to change the freq and volume for front and rear speaker individually via the MMI menu; I would suggest you to check the connections...
Are you able to set the rear volume via MMI? maybe its very low or turned off. Regarding coding this is what I needed for the 5F adaptation...
Indeed, its quite a gamble with these chinese parts, you might get something good or some crappy stuff; at least for my mate who got them, they...
I know there are some china replicas (Aliexpress) for the PFL A3 bi-xenon headlights that will work with the original halogen setup (10 pin...
For PLA you will need to add 8 PDC sensors: 4 into the front bumper (red) and 1 into each corner of the front and rear bumpers (yellow): [ATTACH]...
Front buzzer is located near the parking sensor module, by the main fusebox, there is a space where the buzzer is tucked into place (hopefully the...
I believe they won't work without proper coding as light functions channels are assigned different between Xenon and Halogen headlights, besides...
Hi, you can try adding the daylight running lights designation into the leuchte25 channel (License plate light): ENG116961-ENG116354-Leuchte25KZL...
Separate names with a comma.
