Yea I had a mare setting up the VNT turbo on mine recently, I had to make an EMP gauge set up and log EMP as I had to reset the set screw as well.
When I dropped the sump on mine I had the box off and jacked the engine up using a engine hoist, I was replacing the rear main seal so box came...
That’s for 2g high, and it doesn’t work on the low system :)
yea I’ve read nearly every how too, none of them explain how to get 2g basic plus to either show the secret menu, or display the AUX output on the...
Sorry for delayed response, but are you referring to wiring a AUX input into the DSP amp? As far as I’m aware as long as I have the dsp amp I...
Anyone know how to either activate the hidden menu on the 2g basic plus system or get the AUX option on the screen? move been trawling for ages...
The B7 RS4 clutch is a stronger unit anyway, and you could use an aftermarket LUK clutch and it’ll be stronger than the b5 option. I’ll be...
Don’t burn out the crud on a cast manifold with flaps like I did it melts the soft metal bushings I used caustic soda on my 3.0tdi inlet on the...
https://forum.rs246.com/viewtopic.php?t=117463
I done mine on my back, it’s not too bad, I did the hex key in the sump and RMS as it had been split by previous owner. I do use a gearbox jack...
No they don’t fit iirc, and they have the gubbins for child lock which the front door doesn’t have.
In the past the only cure is to replace the lock usually, I’ve had the locks apart and you can try and grease and free it all up but you’ll have...
whats the code on the sticker either in your service book or spare wheel well?
I’ve rebuilt a compressor on a merc with one of those kits and it worked great.
New lock mechanism most likely. that’s if the door is all aligned correctly. have you tried spraying WD40 into the lock itself?
Just get them rebuilt with new pistons and seals, be careful with the calipers on a V8 as they are only for a V8 car. a company called big red in...
Is the n75 still connected up?
It should go to a plug on the bulk head, in the black plastic holders that holds the pre and post cat lambdas and maybe a couple of other...
What will you do if the engine wants to protect itself and go into limp mode?
It doesn’t suck, it’s just needs diagnosing properly.
Separate names with a comma.
