Yes i had to order a new sill made by a polish company (about 25 euros with delivery) and labor was 150 euros, they did a pretty good job, and...
does it happen with the clutch pressed in? i had a similar problem and it turned out to be the gearbox
no i'm talking about the AC/heater control unit itself not the sticker around it. Anyway i found out that it's from the seat leon/toledo of the...
what is this ac controller you have? it looks really nice
So i didn't pass technical inspection because "the driver side sill is rusted" so i pulled the plastic fender to investigate and.... [ATTACH]...
i used to have the same code with all marks lined up perfectly so i ended up replacing my timing belt and tensioner which were changed 20k km...
after i got a new cable fitted the horn started working again (hooray!!) but the airbag faults still remained except the driver side airbag.... i...
so i removed my steering wheel and found this [ATTACH] [ATTACH] the cable was split and that explains the horn not working and maybe the airbags...
And where should i plug it ? there is no such connector in the seat...
i did remove the driver seat to repair it and noticed there was a plug going from the floor that didn't connect anywhere in the seat... could that...
Thanks for the reply! Where would i find the j234 module and how much should i measure?
In the measuring blocks i read: Airbag driver side: too high Airbag passenger side: too high Belt tensioner front drive...
Are there any fuses or relays i could check? The problem seems to be with the control unit because the error is for multiple airbags
They come back
Hi, Fired up the car first time after the rebuild and my horn wasn't working so after connecting the vagcom i got big errors on the airbags...
thanks for the help anyways
its a 6 speed quattro
is that the 228 mm ?
Any help guys.... i really need to get this done
Separate names with a comma.
