The rear of the fuse box looks like this.
I have seen similar posts. They move the fuse half position and hit the powered on ignition line. From this: |-12v constant |-Cable that goes...
Have a read at this post. Although it is about front and rear PDC and PLA, there are many information regarding the looms....
Hey dude, I am waiting for the door module to arive for this retrofit. Quick question: About the original 3 pin mirror connector, you said you...
Worth trying.
The steering wheel is not connected with the stalk though. So the steering wheel by itself cannot be the issue. Something related to the job done...
Is the noise there even when you just cruise in a road with no bumps and no turns? If I had a noise when I am just rolling, I would suspect the...
Happy new year!!!
4E2837016 I think is for 3 door cars. Link Yours is a sportback so 5 doors. Check this link. You should probably go for 4F2837016 or 4F2837016B...
Hey Troubs, I prefer the location that you have right now. You can have the armrest up or down with no difference. And also you can use the...
Troubs must be right. Mine is a 2010 model and had the MK60EC1. VCDS: this is the way!
I am glad the drawings helped you! This is the point of being part of a forum!! Total cost for only 150€? Man this is great!!! Mine was 415€...
Those are the original from Audi. Clutch and brake you remove the existing rubber and install the new. For the acceleration pedal you replace the...
You can also check than the module is in good condition. When I did the same retrofit, I bought a module from eBay and some of the pins were...
Robin is absolutely right! Recently I made all the looms myself for PDC and PLA retrofit so I know that it costs much more to source all the...
1. As you have MFSW the steering module should be the correct for the cruise control retrofit. 2. Yes as said above the plastic has markings...
You can do the cut your self as samisnake said. If you are careful enough you will have better results than my sloppy cut! Although nobody has...
Since I bought the correct stalk when I did the retrofit, I have not done the stalk swap myself. But as I understand from the video, the only part...
Thanks lleiro! I am not looking for a new solution at the moment. The one that I have is perfect for my current needs.
Hey, Yes I combined the two connectors. If I remember correctly, on the connector of the Bluetooth module, there where empty slots where the...
Separate names with a comma.
