Don't think you can really throw all the blame at Autodoc. I have used them many times over the last few years and never had an issue. If Brexit...
Most of the time on track I run it around 1.7-1.8 bar , Push to pass I normally set to 2 bar so goes from around 440-450 to 500bhp. Just use it...
Been preparing a few things for the gearbox install when it gets warmer in a few months. The Steering wheel I bought I made an aluminium plate for...
Just changed the steering wheel in the TT also a flat bottom item. Bought a cheap Seat Ibiza Cupra item off fleabay in almost new condition for...
What reading are you seeing on the differential pressure sensor? This measures the pressure drop across the DPF. On my 3.0TDI CAPA anything over...
I would leave the Jabbasport map on. Keep an eye on the fuel trims on VCDS and see how it's going. I ran my 225 TT with a FMIC, decat 3" downpipe...
From the VCDS logs Particle filter: soot mass calculated: 35.81 g Particle filter: kilometers since last regeneration: 920688 m So it's done 920...
The modern diesels typically have 3 or 4 sensors. The lowest number sensor is closest to the engine. So 1 is pre turbo usually in the manifold...
Two part discs like the OE ones and Zimmerman have better cooling than the single piece items, they are also lighter . I found this on my track TT...
When you say Best what do you mean?. Best for stopping you on track , best for longevity , Best looking??. Drilled discs should really be avoided...
Take it for a drive around the block after you have washed it.Alternatively don't put the handbrake on. If it's an auto it should be in park which...
No I never really noticed them squealing at all at any point.
Most modules are protected against things like this and sometimes you will get away with it. If the car has been stood for 3 years and never...
RS29 is on a different level to DS2500. That is what I was running in mt RS3 4 pot calipers with the V6 334X32mm discs and they were very good....
Gearbox and brakes look really good. Not sure I would like to put 800Lb/ft through it, still has stock first and second gears but I am sure it...
Looking at the wiring of my 2008 3.0 TDI , I assume yours is probably similar the alternator connects to the starter that then connects onto the...
I have just rebuilt my TT 1.8T for the second time after a Wossner piston failed. There is a build thread linked in my signature.You have a very...
Bill posted something on FB a while ago using a 12 way rotary switch and the flex fuel input to effectively give 12 different discrete boost...
Just noticed the end of your power steering cooler lying on the ground in the one picture. Mine wasn't that rusty and corroded and started leaking...
Well you now know why it was cheap. MAF unplug, Code read and checking for boost leaks in the hoses are where you start. After that there are many...
Separate names with a comma.
