Could try this http://www.audienthusiasts.com/VagComDIS.html Enabling Lap Timer on MY2010+ *Oil temperature will be enabled as well: [17 -...
No idea sorry, mine was already there.
You need to go through the menu with the buttons on the end of the stalk I had it on my Pre FL red dials and now my FL wite ones
Some people just have no mechanical sympathy at all
I wonder if you could be suffering from this? Worn oil pump hex drive shaft on MY09 2.0 TDI | Audi-Sport.net (audi-sport.net)
Spot on! Takes about twice as long for the oil to get to 90, as the coolant does
Yes
If it holding 90 I'd say it was and your old age, want my diesel? Takes an age haha, especially if not under load
The wiring is plug and play, you need a GPS aeriel and to tell the gateway you now have an rnse with vcds
Yes, hopefully. If any issues use this page, should be someone close to you if any coding does need changing...
As long as all the wiring matches it should be a simple clear. I guess you put the ignition on when the seats were out. If the steering wheel is...
You just need it reset. any garage not sure if carista or obd11 can do it
Nice. I'll add mine here too if you don't mind. I modified mine for the quadlock case, and wireless charger. I just need to tidy the wire to a...
This will help [MEDIA]
no sorry, but they do a list of other bolts you need in their description
Yours is plastic can source the bolts but darkside do a whole kit...
Two new rear callipers as one was sticking, and new black diamond pads as one side were severely worn down
http://wiki.ross-tech.com/wiki/index.php/Audi_A3_(8P)_Steering_Wheel#Coding
Mine was the bluetooth box under the passenger seat and took out the gateway that lives behind the glove box
[MEDIA]
Separate names with a comma.
