Search results

  1. E

    Air con issue

    Hey there. I was wondering if anyone could tell me what the normal pressure of the refrigerant in the air con system should be mine is not very cold and it’s reading around 5 bar (72psi approx.) Any help here would be appreciated Sent from my iPhone using Tapatalk
  2. E

    Rear disc change

    Just a quick question regarding removal of the rear carrier on a 07 8PA. Is the carrier secured using 2 M14 multi spline cap bolts? Or is it a special multi spline that is required? Many thanks Sent from my iPhone using Tapatalk
  3. E

    Connector identification

    Hi there while trying to fault find issues on my front wheel drive BMN iv came across this black connector with the ID 940 I believe this is a standard item as the orange connector is ID 925 (exhaust temp sensor) is also standard and these are the only 2 of the sensors that control the fault...
  4. E

    Heater issues (again)

    Just an FYI I flushed out the heater matrix on the car using an electric pump and warm water with radiator flush, flushed and back flushed for 2 hours. The amount of funk and corrosion removes was unbelievable now heater is working fantastically. Sent from my iPhone using Tapatalk
  5. E

    Heater issues (again)

    Iv has water pump checked first time this Happened. I believe the heater matrix is blocked it was flushed the last time but I’m pretty sure it wasn’t done as well as it should have been. I’ll be flushing it myself this week. Just a pain getting to the heater hoses on the bulk head lol Sent...
  6. E

    Heater issues (again)

    Hi guys just had my car scanned and although no faults show up with the HVaC system I’m getting no heat in the cab. Guy that scanned the car who was pretty good and knowledgeable reckons it maybe the heater resistor but I thought that knot controlled the speed of the blowers? Am I wrong or is...
  7. E

    Heating issues.

    I was thinking thermostat also it’s on my to do list. [emoji106] just looking to see if there has been any issues like this in past that maybe Is an easy fix or overlooked issue that I may not have thought of. Thanks again for the help. Sent from my iPhone using Tapatalk
  8. E

    Heating issues.

    Thanks for the reply bud. The heat inside the cab should be hot tho it’s literally only above cool on the high setting it never gets to be even remotely warm. Sent from my iPhone using Tapatalk
  9. E

    Heating issues.

    Hi guys once again I need some help/advice. My pd170 Heater doesn’t want to heat up the car. At best I get only half warm air into the cab and thts when engine temp gauge is in mid position. Iv noticed it also seems to take an age to warm up to around 75deg after tht it seems to be fine but...
  10. E

    CAI for diesel

    Yes I do does tht caus an issue? Sent from my iPhone using Tapatalk
  11. E

    CAI for diesel

    Hi all I’m looking to install a cold air intake on my pd170 sportback. I’m having trouble finding decent kits. Does anyone in here have a CAI installed in There diesel and do you have any links or info that may help me. Thanks in advance. Sent from my iPhone using Tapatalk
  12. E

    Lambda sensor

    After reading through old threads found during search my issue may be due to the ecu needing reset (removing for 15mins) I understand this may fiddle with some settings ie radio code and windows. But I have a concern about this throttle body alignment iv been reading about. Surely it won’t be...
  13. E

    Lambda sensor

    EML comes on the second start of the car it’s saving a code the first time and illuminates the light the second time. Clear the codes the it comes in again the second time I start the car. Fingers crossed it’s just the sensor Sent from my iPhone using Tapatalk
  14. E

    Lambda sensor

    Yeah checked them it’s saying faulty lambda sensor. Hopefully it is just a faulty one of the shelf and nothing more untoward. Thanks for the reply Sent from my iPhone using Tapatalk
  15. E

    Lambda sensor

    Hi all I changed my lambda sensor the other day due to the DPF issue and after installation I managed to clear issues with DPF and get a passive regen done but my engine light is in and won’t clear codes are p0130 and p0135 both attributed to the lambda circuit could could the probe be faulty or...
  16. E

    Heater issues.

    Hey there iv got only cold air blowing through the cabin even when on high. The motors are all working you can hear them all changing over when selected. I’ve removed the coolant hoses from the matrix and flushed through, there was a fair bit of sludge come out. But still only blowing cold air...
  17. E

    2.0 TDI 170 BMN - DPF issues (sighs)

    Yeah is easy to do. My car is 108k so it’s the first place I’d look. Before spending masses of cash in the garage Sent from my iPhone using Tapatalk
  18. E

    Glow plug light flashing

    Iv had an error code a few times but it seems to fly under the radar when I took my lambda out it was covered in soot. It does help with the fuel mixture but I’m unsure if it’s solely responsible for the mix but my car smells so much better lol Sent from my iPhone using Tapatalk
  19. E

    Glow plug light flashing

    When it’s changed go for a drive leave mrs at home lol. Ul notice the lights will go out and floor it watch the cloud form in the mirror. Sent from my iPhone using Tapatalk
  20. E

    Glow plug light flashing

    Ul need a deep 22mm socket( if u do not have a lambda tool). I cut the cable off after ensuring the sensor I had was correct lol. It unscrewed pretty easily. Located at back of engine close to bulk head, find turbo and move to your left Ul see it sticking up the multi clip is over to the right...
Top