Facelift Jb4 dyno results

gussyldr

gussyldr

Registered User
Joined
Oct 16, 2010
Messages
245
Reaction score
41
Points
28
Location
West London
Hey peeps just wanted to share my jb4 results
Mods
TT inlet pipe
R600 intake
Gfb Dv+
Turbo back milltek exhaust

My engine light came on and put my car into limp mode after fitting my downpipe so if anyone’s planning on fitting one without a remap I’d recommend 42 draft spacer before fitting which I found out the hard way oh well I’m happy with my results
2E275285 4B2A 41D7 A113 52B95FCF9AE8
 
Last edited:
Now we just need your JB4 map settings :hi: Great numbers tho!
 
  • Like
Reactions: gussyldr
Lehn said:
Now we just need your JB4 map settings :hi: Great numbers tho!
Click to expand...

Oh was on map 2 need to to do some logs then give George a shout to tweek map 6 then put back on the dyno but I don’t think I’ll get any more power
 
gussyldr said:
Oh was on map 2 need to to do some logs then give George a shout to tweek map 6 then put back on the dyno but I don’t think I’ll get any more power
Click to expand...

Great :racer: you mentioned you had some trouble with your downpipe but you did the run with the downpipe since it's a turbo back system, right? Aaaand what fuel? Think that's about all the questions I could come up with :icon thumright:
 
  • Like
Reactions: gussyldr
If you have a JB4 you don’t need a spacer on the downpipe. You can change the FUD to 90 in the settings and this will auto clear the engine management light. (Although some experience issues with cruise control after enabling this feature)

On map 6 you might be able to make some more top end power but you can manage to make much more torque down lower.
 
Lehn said:
Great :racer: you mentioned you had some trouble with your downpipe but you did the run with the downpipe since it's a turbo back system, right? Aaaand what fuel? Think that's about all the questions I could come up with :icon thumright:
Click to expand...

Yep did the runs with the downpipe/ full exhaust and i only use shell v power
Ask away
 
A.ShawnS3 said:
If you have a JB4 you don’t need a spacer on the downpipe. You can change the FUD to 90 in the settings and this will auto clear the engine management light. (Although some experience issues with cruise control after enabling this feature)

On map 6 you might be able to make some more top end power but you can manage to make much more torque down lower.
Click to expand...

FUD 90 didn’t work for me for some reason so George suggested I use a spacer also once I set up map 6 I’ll dyno again hopefully i can make a bit more:rock:
 
You must log in or register to reply here.

Similar threads

Marc18
Dyno Results
Replies
17
Views
3K
Marc18
Marc18
Rick @ Unicorn Motor Dev.
2.0tdi 184 Dyno Results
Replies
38
Views
15K
Rick @ Unicorn Motor Dev.
Rick @ Unicorn Motor Dev.
welshy_a4
Revo stage 2 with dyno results
Replies
14
Views
6K
welshy_a4
welshy_a4
A
Facelift MTM Cantronic Tuning Box Dyno Results
Replies
62
Views
9K
ASRman
A
Starry
Jb4
Replies
2
Views
1K
Starry
Starry
Top
Back