Recent content by Tunny

Fixed ABS sensor, after numerous scans and fitting three different sensors then realising it was a bad connection on the abs module.

Staffordshire mate ST5

http://www.ebay.co.uk/itm/271772351911 The best advice I can add is use a good soldering iron, plenty of soldering paste and a magnifier.

Cheers Steve. I've been repairing mobile devices, laptops, anything with a logic/mother board tbh, for years in my spare time so it wasn't to bad at all. I was a bit dubious regarding the quality of the LCD as it has a gloss finish and the original was mat but there's no issues reading the...

Fitted my new VDO LCD last night, quite chuffed with my soldering and the finished result [emoji1]

Busy day yesterday. Just thought I'd share my findings Long overdue list of jobs Misfire plus rough idle for a while Pretty bad oil leak My passenger window had also dropped on one side I replaced the plugs thinking that would sort the misfire(it didn't though), when I removed the old plugs...

Just a quick update. Found some rims and after quite a bit of sweat, wet and dry sanding and plenty of buffering I think they look the bee's [emoji109]

Gerrrrrr :( Cheers Prawn, again!! Bit gutted but never mind, I'm just glad I asked the question as I almost purchased a set off eBay. I kinda get the gist now how the sizes work from your explanation too. Cheers bud

Hi guys I need a bit of help with choosing a set of wheels. I have a 98 1.8t sport, I'm only planning on keeping it a few years then fingers crossed I'm going to join many others who have done the same and purchase a S3. As such I don't fancy modding a great deal or spending to much on it unless...

It's defo worth a go I narrowed it down to the compressor seeming to struggle a bit and thinking the magnet on the clutch maybe caked etc....

Air con fixed!!!!! After dismissing replacing any parts I sprayed a shed loads of wd40 in the grove where the clutch engages on the compressor plus re-greased aux belt tensioner, being carful not to get any on the belt. It's been working perfect since Tuesday with no issues at all. WINNER

No problem mate glad to be of some help, hope you get to the bottom of your problem soon

I'm presuming you've got a 8P with you having econ. I'm not no expert but try these links they have/had similar symptoms, as for your whistle/while from the windscreen vent, personally it sounds as though the flap isn't opening fully and the whistle/whine is air passing through a small gap in...

Is the compressor spinning in the middle(clutch engaging) and the fans working when the air con is switched on but no cold air coming through? My initial thoughts were that mine was also temp related but If it is temp related surly the fans and compressor would stop, I'd bypassing the temp...

After two weeks of searching the web to no avail and thinking I'm the only one with the issue now there's three, I'm not sure about the whistle/whine as I don't get that, where does the sound come from? Plus is yours the same, fans and compressor clutch working as it should regardless of cold...