Hi,
I have just done the virtual cockpit retrofit to my pfl rs3.
Now I have a few fault codes in my Unlocked mib2 mmi and with the virtual cockpit itself that I can't get rid of.
Can you please tell me how I can contact the guys that you bought your mib2 unit from? Maybe they will be able to...
Hi,
Maybe you should try the following.
I think that since you were already told that the drive select button should work without additional wiring modification and just by replacing the gateway to a FL one then it makes me think that the wire that goes to pin 11 is somehow related to it. (since...
Hi,
I wanted to ask you if the bucket seats that you have for sale came from a three or four doors r32(I need the reclaining option)
Also, can you send me a few pictures of the seats so I can see their condition..
Thanks,
Eran
well, for the voltage difference you can use one of these converters (I used one like this when I wired the remote in my car)
http://www.ebay.com/itm/DC-DC-Converter-Regulator-12V-to-5V-3A-15W-Car-Led-Display-Power-Supply-Module-X-/111352814638?hash=item19ed251c2e:g:qIAAAOSwNSxU7rsk
The R8...
Hi,
First of all I just want to say thanks for sharing and I really liked a few of the things you have done with your car :)
Just wanted to let you know that you can keep the obd splitter and connect with vcds..
The problem is that the second input will not work when the first input is being...
Hi Dave,
I was wondering if you still have the phaeton bells from when you replaced your brake discs in your RS4? if yes than I would love to purchase them from you :)
Glad I helped, but this is not how it should work if you have the r8 module with A in its part number.
This module can communicate with the rnse so you don't have to wire it like that.
If you don't mind it no working 100% oem than leave it this way.
Are you sure that you have the R8 module ending with A?
Try to change to lamburgini mode in rnse adaptation
The screen should become black and then try to shift to reverse. If the r8 module is working then you will see the image
Then you should remove the ops from the rnse
Try this coding in the rnse
0709725
If it will work then try also 0209725
Coding it for a3 platform and not r8.
Afterwards try to perform a hard reset from the rnse adaptation channel.
Did you add the rear view camera to the canbus gateway installation list?
Did the ops originally came with your car? If yes then did it came up in the rnse when switching to reverse?
Did you code the ops module (block 10) to also know that there is a rearview camera retrofitted?
Did you code the...
one last thing
I am thinking of connecting the rear view camera power cable from the R8 module to the RNSE lamborghini mode RVC signal, this way the function will work almost the same as it should, but I still would like to try and get everything work properly.
Hi,
I was wondering if you could please help me out with my RVC install.
I already bought and fitted all the needed parts (with the R8 module part number 420 910 441).
my problem is that when I change my coding in channel 4 at the adaptation to 3 the RNS-E does not switch to the RVC image(tried...
no one has been trashing his S-Line latly? :search:
well I guess its back to square one, finding it on ebay and taking a mortgage on my house for this retrofit to be made :(
Thanks for the help and if you happen to have any new info on a bumper than I would surly be glad if you could contact me...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.