- Joined
- Jun 19, 2009
- Messages
- 3,883
- Reaction score
- 619
- Points
- 113
- Location
- Leeds
- Website
- www.aldevelopments.com
260 bhp on vag com lol
haven't put it in a dyno but i do get wheelspin sometimes when the boost kicks in
you sure yours was TD stage 4 unit?
Yes remember that green slip I gave you it was on there tooMD421 on your spec sheet for it?
Yes remember that green slip I gave you it was on there too
i remember the sheet but not the part number..
no way did it drive like a stage 4, it was only a little more airflow than a stock k04 and could'nt hold top end boost more than a k04..
weird
wonder if they sold you something and supplied another lower spec unit in error?
Bill, Martin Wright at TD says "It may also be worth checking the MAF sensor and boost control solenoid to make sure
there is not a problem with these".
Do you think There could be a problem?
Bill, Martin Wright at TD says "It may also be worth checking the MAF sensor and boost control solenoid to make sure
there is not a problem with these".
Do you think There could be a problem?
everyone expects companys to exaggerate a little bit, but rating it at "approx 340-360bhp" and its acctualy doing 260 is absolutely ridiculous, surely its false advertising
MD299 Stage 1 £825
MD212 Stage 2 £845
MD364 Stag3 3 £875
MD421 Stage 4 £999.95
you see the pictures of the CR one in this thread.. does it look like yours do you remember?
It was milled out. but not all the way up the intake like the CRT I should find the pictures and put them up.
Martin send me a email
"I can assure you once again that the turbo you have is a stage 4 MD421. Again,
if you feel there is a fault with the turbo, we will be more than happy to take
a look at it under warranty for you. Just let me know when it is ready and I
will have a courier collect it for you! "
Bill do you think its worth taking it of and sending it back to them?
It was milled out. but not all the way up the intake like the CRT I should find the pictures and put them up.
Martin send me a email
"I can assure you once again that the turbo you have is a stage 4 MD421. Again,
if you feel there is a fault with the turbo, we will be more than happy to take
a look at it under warranty for you. Just let me know when it is ready and I
will have a courier collect it for you! "
Bill do you think its worth taking it of and sending it back to them?
It was milled out. but not all the way up the intake like the CRT I should find the pictures and put them up.
Martin send me a email
"I can assure you once again that the turbo you have is a stage 4 MD421. Again,
if you feel there is a fault with the turbo, we will be more than happy to take
a look at it under warranty for you. Just let me know when it is ready and I
will have a courier collect it for you! "
Bill do you think its worth taking it of and sending it back to them?
Well i finally got paid today so have been straight onto Paypal and ordered an Intercooler from Alex at AH Fabrication
265 pounds. a Bargin if you ask me!
Yeah sounds good, does it come with the pipes n fittings?