The car starts and cuts off immediately and throw codes for camshaft sensor out of range and no signal (i don't have the codes stored that was yesterday) .We change it today fixed the timing ,the car starts but it's rough and runs rough.After turn of it starts again and cut of immediately after ,but this time the code is "Camshaft possition sensor (g40) implausible signal .I don't have the car with we at the moment so i cant provide full VCDS scan.My question is on the connector for the sensor when measuring it with ignition on we get on two of the pin 5 volts and nothing on the last one (ground i asume).Broken wire it my prediction but it's just prediction .What the voltages should be on this plug