Hello, this is extracted from a post I published on Audisport-iberica, I'm waiting for Kufatec wires to make the install, they sell them cheaper than the dealer: all spare wires and connectors.
Hello,
I publish here information of my last modification that was delayed months due to a delay of parts at dealer. The asked me for each wire with two terminals 3euros, so i finally bought them at kufatec.
Parts:
To hold the electronic unit there are a lot of possibilities, I bought the foam rubber holder that use the A4 B5 instead of buying the metal holder that uses the A3.
PDC Unit 4B0 919 283 (Thank you BEiiTCH).
Foam rubber holder 8D0 919 285
Parktronic buzzer 4B0 919 279(replaced by 8E0 919 279)
Buzzer holder 8L3 035 243
Screw N 907 750 01
Nut N 908 214 01
Nut 443 819 055 B
Sensors S3 4B0 919 275 A (A3 ones can be used too: 4B0 919 275).
s3 black strip with holes 8L9 807 341 B 7DL
A3 spoiler with holes 8L0 807 521 H 3FZ
Connections in case someone wants to buy all parts at dealer:
4A0 972 883 Conector 12 polos sensores
000 979 018 Pines conector 12 polos
1J0 973 703 Conector 3 polos sensor
000 979 131 Pines conector 3 polos
8E0 972 416 Conector 16 polos centralita
000 979 009 Pines conector 16 polo
4B0 972 623 Conector Zumbador
----------------------------
Conector de 16 polos
Pin 1 - Fusible 5
Pin 2 - Zumbador Pin negativo
Pin 3 -
Pin 5 - Toma corriente remolque
Pin 6 - Conexión Luz marcha atrás
Pin 8 - Masa
Pin 9 - Fusible 5
Pin 10 - Positivo Zumbador
Pin 11 - Señal de velocidad
Pin 12 - Cable diagnóstico K
Pin 16 - Masa
----------------------------
Conector de 12 polos
Pin 1 - pin 3 todos los sensores
Pin 2 - pin 2 trasero centro derecho
Pin 3 - pin 2 trasero centro izquierdo
Pin 4 - pin 2 trasero derecho
Pin 5 - pin 2 trasero izquierdo
Pin 6 - pin 1 todos los sensores
----------------------------
Installation still pending until i receive the wires from kufatec.
Source:
http://www.audisport-iberica.com/foro/index.php?showtopic=114321