Hey guys I have a solid abs light on was wondering how to go about it its displaying 01468 system function test I've tried to do the sequences but it's not going off I cant get the abs light to flash is there a specific way of doing this? Many thanks
Abs light solid on
- Thread starter John palmer
- Start date
Yes you have to start off by generating high pressure in the braking system first to initiate the test.
At a standstill, press the brake pedal really firmly a few times and the ESP and ABS lights should start flashing , then do the sequences as per advice on the net i.e at low speed of approx 13 mph turn steering wheel a minimum of 90 degrees but no more than 180, then the same on the opposite lock, the lights should all then go out.
A large car park is really handy when doing this!
At a standstill, press the brake pedal really firmly a few times and the ESP and ABS lights should start flashing , then do the sequences as per advice on the net i.e at low speed of approx 13 mph turn steering wheel a minimum of 90 degrees but no more than 180, then the same on the opposite lock, the lights should all then go out.
A large car park is really handy when doing this!
Thanks for the quick reply! Tbh I dont have car parks big enough around here to do this but will give it a whirl thank you
