replacing engine

[A3LeighAUM]

I have managed to find another AUM engine to replace mine it comes as a complete unit including gear box an ancillaries ecu and loom, the ecu is loaded up with a remap already. could it be as easy as plugging this ecu into my existing loom or do i need to replace igntion barrel to make use of this remap...the remap is a recommended one and has a print out for 200bhp and 200ib ft not a massive lost if unusable but massive gain if i can use it

i intend on fitting a new cam belt and water pump kit along with a full service on the engine before fitted.. is there anything else that would be wise to do prior to fitting....engine is on 90k ish

 

[<tuffty/>]

ECU will need to be coded to the car or immobiliser defeated

<tuffty/>

 

[A3LeighAUM]

ECU will need to be coded to the car or immobiliser defeated

<tuffty/>

is that a case of finding somebody with the right software to do it.... guessing coding to the car would be best option

 

[A3LeighAUM]

am i right in thinking the new AUM will just plug straight up to my ecu with no coding necessary....

 

[<tuffty/>]

am i right in thinking the new AUM will just plug straight up to my ecu with no coding necessary....

Yes

<tuffty/>