karl210
Registered User
Hi, just thought i would do a log of my car and post it up to see what you guys think of how its running.
Its been making a fluttering/chirping noise under boost at around 3k rpm, i then shortened the actuator rod by 2 turns and this seemed to make it worse. so i put it back to how it was and lengthened it by 1.5 turns. Now there is a lot of lag, but it pulls well at higher rpm, and the fluttering/ chirping has gone away a bit, but not fully. If you need me to take any more logs just let me know which blocks i need to log and i will go and do them.
thanks
Its been making a fluttering/chirping noise under boost at around 3k rpm, i then shortened the actuator rod by 2 turns and this seemed to make it worse. so i put it back to how it was and lengthened it by 1.5 turns. Now there is a lot of lag, but it pulls well at higher rpm, and the fluttering/ chirping has gone away a bit, but not fully. If you need me to take any more logs just let me know which blocks i need to log and i will go and do them.
thanks