VCDS - a4 tdi help

[A4_tdi]

Hi guys,

Could any one tell me how to set up a new inlet flap motor on a4 tdi?

I had the p2015 code so i replaced the lnlet flap motor, car drives spot on but the engine light keeps comming on with same fault code.

Been told something to do with having to set up the new part via vcds/ross tech

Anyone know more on this?

Cheers guys

 

[desertstorm]

http://wiki.ross-tech.com/wiki/index.php/18447/P2015/008213

Think there is an adaption , basic setting for this on VCDS

 

[A4_tdi]

http://wiki.ross-tech.com/wiki/index.php/18447/P2015/008213

Think there is an adaption , basic setting for this on VCDS

Hi mate i cant find the adaption setting for it on the screen. Anymore info on this?

Which option do i need to go into etc

Just got the vcds software so its all abit new to me..

Thanks again

 

[SI-W85]

Not sure if this will help at all but just in case

 

[A4_tdi]

Not sure if this will help at all but just in case

Thanks mate my problem is there isnt a intake flap option on the drop down menu. Theres "test of throttle valve adaption " and " adaptation of regulating flap"

Both of which ive done successfully just cant see one for the actual inlet flat motor...

 

[SI-W85]

Have a read through this it contains the same question as you are asking didn't read it all so not too sure if it gets resolved or not. http://forums.vwvortex.com/showthre...ced-using-vagcom-for-adaptation-get-error-why

 

[A4_tdi]

Any one on here that has/uses vcds?