hello
I actually built my new engine.
the reflection of the parts is a work in progress for 6 months now.
First the parts arrive, or are already home.
broadly, I'll use a 6758 EFR and stroker.
Here are the parts of the engine will be mounted, if you have any comments, I'm listening to you.
construction has not yet started, so it will be changes.
My English is not the best, I will do my best to answer you, I'm in France ...
Block
APX Engine Block ultrasonic clean and blueprinted
92.8mm Forged Crank
1.8 Oil Pump Drive Gear
Mahle Motorsport Powerpak Pistons 83mm -15cc
06a 1.8T Oil Squirters
IE 144 x 20 Connecting Rods
ARP625+ Connecting Rod Bolts
OEM S3 main bearing,
OEM s3 Sputter rod bearing
ARP Crank Damper Bolt for 06A Late 1.8T
Integrated Engineering 06A 1.8T Crankshaft Girdle Kit
Fluidampr Engine Damper
ARP Main Bearing Stud Kit
ARP head studs
OEM Water Pump
9A Manual Tensioner
JE proseal head gasket 83.8/1.4mm
New OEM Oil Pump
New OEM Oil Pump Chain
New OEM Oil Pump Tensioner
Forge Baffled Sump
Cylinder Head
ADR Large Port Cylinder Head - Ported & Polished
camshaft is not yet defined, IE 1.8T 20V Street Camshaft Set IECVA2
Integrated Engineering Cam Gear
Integrated Engineering / ARP Cam Gear Bolt
Integrated Engineering / EKagrip Cam Gear Friction Disc
20 NG motorsport Valve Guides Ventilführung HEAT für Ein- sowie Auslass - NG-Motorsports GmbH
Supertech 1.8T 20V Valve Spring/Titanium Retainer Set
Supertech Intake Valve Set signle groove
Supertech Exhaust Valve Set inconel single groove
New Valve Stem Seals
New OEM Hydrualic Lifters
Turbo
BW EFR 6758
T25 A/R 0.86 when it becomes available
Forge motorsport piston customs or turbosmart
Manifolds
AKS/BD/BARTEK t25 cast top mount
SEM Motorsport Large Port Intake Manifold
Bosch 75mm DBW Throttle Body
Fueling
Siemens 630cc
fuel pump choice not stopped surge pump 044 or intank ttrs or USRT intank fuel pump
Exhaust
Custom Made Downpipe & Center Section
Miltek Stainless Cat Back Exhaust System
Cooling
wgner tuning front intercooler
Intake
Custom (RS4 MAF) with maxogen ITG
Chassis
Bisltein B14
Full Superpro Bushes (Wishbones, Dogbone, Rear Axle, Steering Rack)
Vibra Technics Fast Road Engine Mounts
R32 23mm Front ARB
Drivetrain
Clutch Masters Clutch/FW FX400 02017-HDCL-SP (8pads)
EKagrip 6 Bolt Flywheel Friction Disk
ARP Heavy Duty VW Audi Flywheel Bolt
Brakes
EBC turbo groove R32 (334mm)
porsche cayenne 6 pistons
rear EBC TG 312mm
Rear cayenne 4 pistons
braket for handbrake
Mapping
I actually built my new engine.
the reflection of the parts is a work in progress for 6 months now.
First the parts arrive, or are already home.
broadly, I'll use a 6758 EFR and stroker.
Here are the parts of the engine will be mounted, if you have any comments, I'm listening to you.
construction has not yet started, so it will be changes.
My English is not the best, I will do my best to answer you, I'm in France ...
Block
APX Engine Block ultrasonic clean and blueprinted
92.8mm Forged Crank
1.8 Oil Pump Drive Gear
Mahle Motorsport Powerpak Pistons 83mm -15cc
06a 1.8T Oil Squirters
IE 144 x 20 Connecting Rods
ARP625+ Connecting Rod Bolts
OEM S3 main bearing,
OEM s3 Sputter rod bearing
ARP Crank Damper Bolt for 06A Late 1.8T
Integrated Engineering 06A 1.8T Crankshaft Girdle Kit
Fluidampr Engine Damper
ARP Main Bearing Stud Kit
ARP head studs
OEM Water Pump
9A Manual Tensioner
JE proseal head gasket 83.8/1.4mm
New OEM Oil Pump
New OEM Oil Pump Chain
New OEM Oil Pump Tensioner
Forge Baffled Sump
Cylinder Head
ADR Large Port Cylinder Head - Ported & Polished
camshaft is not yet defined, IE 1.8T 20V Street Camshaft Set IECVA2
Integrated Engineering Cam Gear
Integrated Engineering / ARP Cam Gear Bolt
Integrated Engineering / EKagrip Cam Gear Friction Disc
20 NG motorsport Valve Guides Ventilführung HEAT für Ein- sowie Auslass - NG-Motorsports GmbH
Supertech 1.8T 20V Valve Spring/Titanium Retainer Set
Supertech Intake Valve Set signle groove
Supertech Exhaust Valve Set inconel single groove
New Valve Stem Seals
New OEM Hydrualic Lifters
Turbo
BW EFR 6758
T25 A/R 0.86 when it becomes available
Forge motorsport piston customs or turbosmart
Manifolds
AKS/BD/BARTEK t25 cast top mount
SEM Motorsport Large Port Intake Manifold
Bosch 75mm DBW Throttle Body
Fueling
Siemens 630cc
fuel pump choice not stopped surge pump 044 or intank ttrs or USRT intank fuel pump
Exhaust
Custom Made Downpipe & Center Section
Miltek Stainless Cat Back Exhaust System
Cooling
wgner tuning front intercooler
Intake
Custom (RS4 MAF) with maxogen ITG
Chassis
Bisltein B14
Full Superpro Bushes (Wishbones, Dogbone, Rear Axle, Steering Rack)
Vibra Technics Fast Road Engine Mounts
R32 23mm Front ARB
Drivetrain
Clutch Masters Clutch/FW FX400 02017-HDCL-SP (8pads)
EKagrip 6 Bolt Flywheel Friction Disk
ARP Heavy Duty VW Audi Flywheel Bolt
Brakes
EBC turbo groove R32 (334mm)
porsche cayenne 6 pistons
rear EBC TG 312mm
Rear cayenne 4 pistons
braket for handbrake
Mapping