M
monopole
Guest
Having had a problem with my xenon light range and dealing directly with Nigel (turned out needed VCDS 12.10.2 beta to resolve) I again attempted to try and get the TPMS to work
I followed and selected the following;
17 - Instruments
- Coding
-- Added +16 to the first 4 digits
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 16
---- Tick Bit 2
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 17
---- Tick Bit 2
I had the TPMS "tyre" on the display cluster when selecting ign on, and no "TPMS" fault on the DIS, so I thought hey presto, working fine.
I went back in, and a short time later needed to go out. When I got back in the car I had an "ABS" light on the cluster.
I fetched my VDS cable and laptop and when I select 03 ABS i get the following fault:
Thursday,10,January,2013,10:38:24:58778
VCDS Version: Beta 12.10.2 (x64)
Data version: 20121222
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BL HW: 1K0 907 379 BL
Component: ESP MK60EC1 H31 0152
Revision: 00H31001
Coding: 1642801249250001681101E7921B0081390000
Shop #: WSC 06314 123 12345
VCID: 7DF7C4AFE414F4F6E3B
1 Fault Found:
01486 - System Function Test Activated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 127
Mileage: 4257 km
Time Indication: 0
Date: 2013.01.10
Time: 12:18:42
Freeze Frame:
Count: 0
Count: 14
Count: 12800
Count: 320
Count: 50688
Count: 0
Count: 1
Count: 0
I looked and could'nt find any way to clear the fault, even tried VCDS 11.11.5 to see if it was a VCDS beta fault, but no such luck, the light is still there on the cluster
any help greatly appreciated
I followed and selected the following;
17 - Instruments
- Coding
-- Added +16 to the first 4 digits
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 16
---- Tick Bit 2
03 - ABS / Brakes
- Coding
-- Long Coding Helper
--- Byte 17
---- Tick Bit 2
I had the TPMS "tyre" on the display cluster when selecting ign on, and no "TPMS" fault on the DIS, so I thought hey presto, working fine.
I went back in, and a short time later needed to go out. When I got back in the car I had an "ABS" light on the cluster.
I fetched my VDS cable and laptop and when I select 03 ABS i get the following fault:
Thursday,10,January,2013,10:38:24:58778
VCDS Version: Beta 12.10.2 (x64)
Data version: 20121222
Address 03: ABS Brakes (J104) Labels: 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BL HW: 1K0 907 379 BL
Component: ESP MK60EC1 H31 0152
Revision: 00H31001
Coding: 1642801249250001681101E7921B0081390000
Shop #: WSC 06314 123 12345
VCID: 7DF7C4AFE414F4F6E3B
1 Fault Found:
01486 - System Function Test Activated
000 - -
Freeze Frame:
Fault Status: 01100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 127
Mileage: 4257 km
Time Indication: 0
Date: 2013.01.10
Time: 12:18:42
Freeze Frame:
Count: 0
Count: 14
Count: 12800
Count: 320
Count: 50688
Count: 0
Count: 1
Count: 0
I looked and could'nt find any way to clear the fault, even tried VCDS 11.11.5 to see if it was a VCDS beta fault, but no such luck, the light is still there on the cluster
any help greatly appreciated
Last edited by a moderator: