K03 shaft question!!

Wilts

Registered User
Joined
Jun 5, 2012
Messages
100
Reaction score
3
Points
16
Location
Torqauy
Hey guys i finally got a second hand k03 turbo for my audi a3 agu engine and it seems fine apart from the shaft with the fan on has movement from side to side its not alot maybe 1mm if that its only side to side not in and out but would it be ok or shall i get my money back?? Any info would be great.
 
A little movemoent side to side is fine... excessive movement in and out would be bad but as you don't have that you should be fine

<tuffty/>
 
in out is a big problem, side to side is ok with 1mm, i was dead lucky when i changed my TIP i checked my ko3 and had no movement at all, 121k too. good luck with it.....
 
Sounds ok to me once oil feed is fitted and running should sort it out should of asked me got my ko3 sitting in my shed only covered 80k
 
Cheers guys as always its put my mind at rest, it only cost me £88 delivered so worth a punt at that price getting it on next wkend so wel see lol.
 

Similar threads

Replies
3
Views
738
Replies
17
Views
7K