Just done some logs, please can anyone tell me if something is not right, keeps going into limp mode under full boost,
1 fault boost deviation check dv......cleared and did this log.
how do you reset the throttle adaption via vcds
cheers guys
Saturday11December201012:42:138N0 906 018 J1.8L R4/5VT 0004Group A:'032Group B:'115Group C:'003LambdaLambdaBin. BitsBin. BitsRPMLoadAbsolute Pres.Absolute Pres.RPMMass FlowLoadIgn. TimingTIMETIMETIMEMarkerSTAMP%%STAMP /min% mbar mbarSTAMP /min g/s% °BTDC0.42-3.2-0.80.914200167.7229018600256062.7897.3181.71-3.2-0.82.1357609.8121014501.315200174.56100213.02-3.2-0.83.424760188241022302.623960121.6910022.54.24-3.2-0.84.646000170.7227019503.825200183.86100155.45-3.2-0.85.934640136.8240016005.046360198.06100156.75-3.2-0.87.155240180.5237021506.354760173.0610012.87.95-3.2-0.88.355760170.7223021307.555400188.72100129.17-3.2-0.89.57608051.1100023008.755920192.6999.612.810.37-3.2-0.810.77528012.8100010909.97596012.117.17.511.57-3.2-0.811.98448012.81000104011.17496012.696.74.512.88-3.2-0.813.39380012.81000103012.38428010.865.53.814.28-3.2-0.814.82800151000103013.8835609.084.3315.69-3.2-0.816.09116015.81000102015.222806.312.72.323.44-3.2-0.823.852880100.82170118024.353760103.7810024.824.75-3.2-0.825.155720172.22350203025.55556012.753.96.825.96-3.2-0.826.464720181.22370215026.865240177.9210014.327.37-3.2-0.827.776280172.22150202028.176640195.1910015.828.59-3.2-0.829.074720120.32290133029.4848009.397.82.329.88-3.2-0.830.28456012.81000114030.68436012.116.33.831.08-3.2-0.831.59392013.51000105031.9937609.814.73
how can i get the excell screen posted properly....
1 fault boost deviation check dv......cleared and did this log.
how do you reset the throttle adaption via vcds
cheers guys
Saturday11December201012:42:138N0 906 018 J1.8L R4/5VT 0004Group A:'032Group B:'115Group C:'003LambdaLambdaBin. BitsBin. BitsRPMLoadAbsolute Pres.Absolute Pres.RPMMass FlowLoadIgn. TimingTIMETIMETIMEMarkerSTAMP%%STAMP /min% mbar mbarSTAMP /min g/s% °BTDC0.42-3.2-0.80.914200167.7229018600256062.7897.3181.71-3.2-0.82.1357609.8121014501.315200174.56100213.02-3.2-0.83.424760188241022302.623960121.6910022.54.24-3.2-0.84.646000170.7227019503.825200183.86100155.45-3.2-0.85.934640136.8240016005.046360198.06100156.75-3.2-0.87.155240180.5237021506.354760173.0610012.87.95-3.2-0.88.355760170.7223021307.555400188.72100129.17-3.2-0.89.57608051.1100023008.755920192.6999.612.810.37-3.2-0.810.77528012.8100010909.97596012.117.17.511.57-3.2-0.811.98448012.81000104011.17496012.696.74.512.88-3.2-0.813.39380012.81000103012.38428010.865.53.814.28-3.2-0.814.82800151000103013.8835609.084.3315.69-3.2-0.816.09116015.81000102015.222806.312.72.323.44-3.2-0.823.852880100.82170118024.353760103.7810024.824.75-3.2-0.825.155720172.22350203025.55556012.753.96.825.96-3.2-0.826.464720181.22370215026.865240177.9210014.327.37-3.2-0.827.776280172.22150202028.176640195.1910015.828.59-3.2-0.829.074720120.32290133029.4848009.397.82.329.88-3.2-0.830.28456012.81000114030.68436012.116.33.831.08-3.2-0.831.59392013.51000105031.9937609.814.73
how can i get the excell screen posted properly....
Last edited: