PS how much do you charge to change the buttons on he SAT NAV to the new style???
He done it just as NHN said and it worked fine apart from the abs lights staying on
NHN
One more issue the petrol gauge is also not working...Do I have to change the sensor????
I'm guessing your car is pre-2004? If you read NHNs thread about fitting new white cluster you will see the wiring has changed and you may need a new pump/sender, one that uses 3 wires for the fuel sender not just 2.
Thanks mate
my car is a 54 (step or oct) one....I have see NHNS thread
Woooooooooo Hoooooooooo it works like a dream oh yeah
Thanks guys for support
1 wire for sender iirc, the newer cluster needs 2 wires.
I'd say you tried to run before you could walk mate, interms of rushing out to get a cluster, some better research may of been advisable to see which facelift cluster suits your A3.
The S3 cluster is potentially wrong for your A3, you should have got an A3 cluster mate, this maybe the reason why you are having issues overall, but you should have no issues getting the skc out of either given the 8P has the same immo systems from 03 till present day, using VAS, but there's a procedure to follow.
...
Sunday,22,May,2011,14:30:07:04214
VCDS Version: Beta 11.2.0
Address 17: Instruments
Control Module Part Number: 8P0 920 931 C
Component and/or Version: KOMBIINSTR. VDO H20 0570
Software Coding: 0037118
Work Shop Code: WSC 06314
VCID: xxxxxxxxxxxx
Advanced Identification
Serial number: xxxxxxxxxxxxxx
Identification: VDD-024
Revision: D0H20004
Date: 01.02.07
Manufacturer number: 0765
Test stand number: 7601
Flash Status
Programming Attempts: 0
Successful Attempts: 0
Programming Status: 00000000
Required Conditions: 00000000
Flash Tool Code: 00000 000 00000
Flash Date: 01.02.07
Misc.
Hardware number: 8P0 920 931 C
Lot Number:
Type Lock:
Car Info
Chassis Number: WAUZZZ8Px7xxxxxxx
VCDS Info:
Labels: 8P0-920-xxx-17-MY7.lbl
Wednesday,18,May,2011,20:05:12:04214
VCDS Version: Beta 11.2.0
Address 17: Instruments
Control Module Part Number: 8P0 920 932
Component and/or Version: KOMBIINSTR. VDO H15 0820
Software Coding: 0069128
Work Shop Code: WSC 03328
VCID: xxxxxxxxxxxx
Advanced Identification
Serial number: xxxxxxxxxxxxxx
Identification: VDD-024
Revision: D0H15004
Date: 02.06.08
Manufacturer number: 0700
Test stand number: 7601
Flash Status
Programming Attempts: 0
Successful Attempts: 0
Programming Status: 00000000
Required Conditions: 00000000
Flash Tool Code: 00000 000 00000
Flash Date: 02.06.08
Misc.
Hardware number: 8P0 920 932
Lot Number:
Type Lock: VDD-
Car Info
Chassis Number: WAUZZZ8Px9xxxxxxx
VCDS Info:
Labels: 8P0-920-xxx-17-MY8.clb
Nobody can provide a detailed description on how to code the new cluster with the VAS machine yet?
I am dying to install it in my car but I don�t want to lose another 100 euros if the guy in the Audi dealer doesn�t know how to do it.
Hi! I was looking about A3 inmos, how to identify the types used.. and as I understand, you say it's always the same, right?
I'm not worried about swaping instrument cluster, I would like swap engine ECU...
I't some long to explain all, but the most important part it's I've a pre-facelift S3, and maybe I have to use a S3 facelift ECU to allow use other equipments..
I was worried if the inmo were diferent and could have problems matching inmo of new ECU with my instrument cluster
(something doesn't it's really standard, should be impossible for the dealer!)