Ooh, im guessing it only works for automatic 8ps right?
Ahh makes sense. Just scanned mine and its mk60 not ec1. i suppose its quite cool to have. How does it work? is it like an automatic parking brake? or is there a button you have to press.mines a manual, as mechanic69 said its the brakes that are held on when on an incline, but from what ive read you need a specific abs controller (mk60ec1)
https://www.audi-sport.net/xf/threads/hill-hold-assist-vcds-mod.121526/page-2#post-1665958
Ooh, im guessing it only works for automatic 8ps right?
Ahh makes sense. Just scanned mine and its mk60 not ec1. i suppose its quite cool to have. How does it work? is it like an automatic parking brake? or is there a button you have to press.
its one of those things that isnt necessary to have, but once you had it before, you miss it if it isnt on your next car. bit like parking sensors or reverse camera etc.
when youre on a slope, the brakes hold the last position they were in. so if you press the brakes, you feel the pedal go firm as the brakes hold. you can then take your foot off the brake and press the accelerator which will then take the brakes off. the brakes also go off by themselves after a couple seconds.
i mean you can achieve the same result using the handbrake, but its nice to have.
What guide?just enabled hill hold assist using one of the guides on here.
had it on my last car and missed it on the a3, one tick box later and all is well.
What else did it require? Did you have a usual A3 speakers with a sub before? How much of an improvement you got? Was it worth the money? May be I should do it too.
Another day, another job done
Today I swapped out all my door speakers from the nasty paper cones to something a bit more substantial. Instant improvement in bass response
These are the exact ones I boughtHow much were the speakers? Size/model etc.
Also I never thought bass was the issue on the OE speakers but rather the clarity of sound was missing!
Any body wants any type of logo or decal any size made either your own design. This guy can based in Huddersfield. Not expensive. Top bloke drop me a pm.Seat logo
Sent from my SM-G935F using Tapatalk
Ive put leather on my knee pads. I’ve also tried to wrap the grey part on my rear and front diffuser. I’m not very patient, so this did not go well. More wrap ordered and will give another try next week, with the parts off.
Any pics of the knee bars ? did you do them yourself ?
I've pastidipped my front and rear difuser along with grille surround and lower mesh grilles, i think it has a nice textured finish.
Have you got any pictures of the plastidip work you have done ?
Sent from my iPhone using Tapatalk
Today I fitted an LED bulb in one of my number plate lights. I only needed to do one as I have a reversing camera with built-in LED so wanted LED lighting on the other side so it wasn't half yellow half white.
This simple job was a total nightmare!
I spent a long time cursing the person who put those idiotic screws in and in the end broke the hosing to get it off and then removed the screw with a pair of pliers.
Once I had done that simple job of fitting the LED bulb in the one I removed from the other side... Wait no! not simple... Now spent a long time cursing the idiot who decided these parts needed to be handed. Then another while converting a left-hand housing into a right hand one. Both metal prongs need to come out and swap over also the little clip needs shortening as the hole is in the wrong place.
Then put back together and used a different screw!
Fitted the rest of the B14s and got them set up this time round, sweet
Sent from my iPad using Tapatalk
Nice brakes
My second set, work really well with ds2500s can’t fault them
Sent from my iPad using Tapatalk
Again my patience took the best of me. Not the best mod I have done. It was also hard work getting the knee bars out to cover. The ones I purchased off eBay, £30 were of good quality leather. I’m just not patient enpugh to glue them in place. I also rushed putting them back in.Any pics of the knee bars ? did you do them yourself ?
I've pastidipped my front and rear difuser along with grille surround and lower mesh grilles, i think it has a nice textured finish.
Again my patience took the best of me. Not the best mod I have done. It was also hard work getting the knee bars out to cover. The ones I purchased off eBay, £30 were of good quality leather. I’m just not patient enpugh to glue them in place. I also rushed putting them back in.
Looks good and seems like alot was involved to install this. Do you have a list of what was needed to install this?Retrofitted OEM R8 high line reverse camera
Looks good and seems like alot was involved to install this. Do you have a list of what was needed to install this?
I do. It was quite a long retrofit to be fair and some planning as it was never an option for the 8P. £600 all in for the luxury.
Hi I did something similar but android head unit. My reverse camera part of number plate light. Ball ache of a job to run wires though but worth it in the end.Nice work! I have the same setup. What revision camera (part#) did you use?
Hi I did something similar but android head unit. My reverse camera part of number plate light. Ball ache of a job to run wires though but worth it in the end.
Sent from my SM-G935F using Tapatalk
Nice work! I have the same setup. What revision camera (part#) did you use?