So when I fitted the tweeters onto my A-pillars I had to remove the boost gauge, decided to fit it in the driver side airvent.
Airvent carefully stripped
Piece of 9mm traced and cut to size
After some sanding and working with the coarse file I had this
Vent taped up and then the insert received some filler after the hole was cut
After about 4 applications of filler this is where I am at now, still lots of sanding ahead, hate doing such small intricate parts
Received the final sanding
Quick coat of paint added and then carbon trimmed to size
First coat of the many of resin applied, will trim it to size tonight and then add 5-7 coats of resin more, then sand and clear
And be careful with a new Stanley blade, cuts trough a finger tip like ****al
Gave the pod a quick rubdown
3 coats of resin