1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Speedy's hunt for missing horses

Speedy Steve Nov 13, 2012

  1. Speedy Steve

    Speedy Steve Active Member

    1,258
    16
    38
    Cost, and it means i could fit it sooner! Not just cost of having pipes welded on but also id need a new head light switch as my front fog's are on all the time
     
  2. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,343
    394
    83
    What cost? Ive used 76 to 63mm reducig silicone elbows and still kept my fogs and it looks cool lol. So no extra cost mate, uou could just remove the fogs for now until you buy a new switch then refit them afterwards.
     
  3. Andrew@A.L.D

    Andrew@A.L.D May add NOS to 600+bhp S3.

    3,879
    617
    113
  4. Speedy Steve

    Speedy Steve Active Member

    1,258
    16
    38
    At the mo its a stock AMK with rods done 440 injectors which im guessing will need to be replaced and the hybrid ive been running since i started three years ago (none clipped)

    I now have a shiney new paper weight at work
    [​IMG]
     
  5. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,343
    394
    83
    V3 mani?
     
  6. superkarl

    superkarl MAN OF STEEL

    9,571
    2,464
    113
    yeh.
    shame i couldve sold you a cracking V2
     
  7. superkarl

    superkarl MAN OF STEEL

    9,571
    2,464
    113
    not literally!
     
  8. Welly

    Welly VX220 SC Driver :)

    10,696
    129
    38
    BAD choice of phrase there Karlos.
     
  9. superkarl

    superkarl MAN OF STEEL

    9,571
    2,464
    113
    its totally fine honest :whistle2:
     
  10. Speedy Steve

    Speedy Steve Active Member

    1,258
    16
    38
    Well i got this brand new for £260 sio couldnt say no really. If only i had time to fit all this myself though
     
  11. StaceyS3

    StaceyS3 Well-Known Member

    2,505
    502
    113
    Sorry for the dislike karlos me and the iPhone aren't seeing eye to eye today ;)
     
  12. Speedy Steve

    Speedy Steve Active Member

    1,258
    16
    38
    Well a trip to Dynodaze today brought some interesting results. All Ive done since being on the rollers at Bills is change to the smaller WMI nozzle and the results were 311 BHP 345 LBFT which im a little optimistic at but they cant be so far out. All i really wanted to see was if the power was produce higher up the rev range as it seamed to die off around 4rpm on Bills rollers last time so It looks promising. No where near what Liquid says mind! lol
     

Share This Page