TYphoon GB
Registered User
So the rear end creaking was getting to me and as the shocks have done 180K (original) its sitting on the springs and not doing much damping.
Then the front end low speed clunk returned suggesting a lower control arm issue again funny as they are less than 25K old.
Front end first as I am not ordering any parts till I have eyes on.
All fell apart pretty easily with Mr Grinder only out for one troublesome nut.
The rear arm was wobbling so that failure is confirmed
The front arm seemed OK but the shock bush was blown.
Then dropped this weird thing out....supposed to do damping.....nope
least I didn't have to do the whole pinch bolt thing again.
Moral if the shocks are gone the new arms will follow....!
Drop the rear end work later...
Then the front end low speed clunk returned suggesting a lower control arm issue again funny as they are less than 25K old.
Front end first as I am not ordering any parts till I have eyes on.
All fell apart pretty easily with Mr Grinder only out for one troublesome nut.
The rear arm was wobbling so that failure is confirmed
The front arm seemed OK but the shock bush was blown.
Then dropped this weird thing out....supposed to do damping.....nope
least I didn't have to do the whole pinch bolt thing again.
Moral if the shocks are gone the new arms will follow....!
Drop the rear end work later...