1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Head light adjusters

ScottD3 Mar 7, 2012

  1. ScottD3

    ScottD3 I want your faulty electronics Supporter Team V6 quattro Audi A8 Audi S8 Team Akoya saloon TDi

    15,164
    1,123
    113
    Any one added the adjusters them FL head lights to PFL head lights?
    Also, where is the head light adjuster knob on FL B5s?
     
  2. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,578
    868
    113
    hmm, your post makes no sense :p

    facelift knob is on the drivers knee bolster, to the right of the steering wheel.
     
  3. ScottD3

    ScottD3 I want your faulty electronics Supporter Team V6 quattro Audi A8 Audi S8 Team Akoya saloon TDi

    15,164
    1,123
    113
    On the back of head lights is a little motor that moves the head light up and down when you play with the knob.

    My facelift head lights don't have this motor but my pre-facelift lights do.

    Can I take the motor off PFLs and fit it to the FLs?
     
  4. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,578
    868
    113
    Ah ok, no the facelift motors are different.

    You can get them from various other cars in the scrappy or on ebay though, i think golfs are the same.

    1J0941295B is what you need, and they're fitted to many different VAG group cars with Valeo headlamps.
     
  5. ScottD3

    ScottD3 I want your faulty electronics Supporter Team V6 quattro Audi A8 Audi S8 Team Akoya saloon TDi

    15,164
    1,123
    113
    Do you know what the difference is?
    If its just the plugs/pins, I'll put my PFLs in.
     
  6. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,578
    868
    113
    no idea mate, the PFL ones are certainly MUCH larger, so i dont know if they'd even fit.
     
  7. ScottD3

    ScottD3 I want your faulty electronics Supporter Team V6 quattro Audi A8 Audi S8 Team Akoya saloon TDi

    15,164
    1,123
    113
    They do look alot bigger than the ones in the ebay link.
    I think the adjuster shaft looks longer as well.

    When I take the lights out next I'll take a look.
     
  8. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    18,578
    868
    113
    they lie on their side very close to the bottom of the housing, and with the bulk i suspect you'll struggle.
     
  9. Blue_Thunder

    Blue_Thunder Well-Known Member

    1,776
    33
    48
    Think I've got a brand new one kicking about somewhere.
     
  10. Nessy

    Nessy VW + Audi mad

    939
    89
    28
    I can't remember the exact differences as I did the job 6yrs ago now, but pre-FL adjuster motors will definitely not fit FL headlamps (am talking OE Valeo headlights only here mind).....
    When I fitted FL Valeo lights to my pre-FL car I had to use the FL adjusters , I think it is the nylon shaft with the ball on the end that is a different length between FL and pre-FL?
     

Share This Page