1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Exhaust flexi

OldRedEyes Oct 19, 2011

  1. OldRedEyes

    OldRedEyes Member

    445
    0
    16
    Just had the car mot'd, and it passed with an advisory on the exhaust flexi.

    Does anyone know the part number for this, is it dealer only, is there pattern parts, is it an easy DIY fit (it's getting cold outside now).

    Have struggled to find any decent info on this matter

    Car is a 2000 1.8T avant

    Cheers in advance
     
  2. Jason.s

    Jason.s Active Member

    2,879
    348
    38
    Fwd or 4wd?
     
  3. aragorn

    aragorn "Stick a V8 in it!" Staff Member Moderator VCDS Map User

    17,774
    674
    113
    Its part of the downpipe if you want a "bolt in" fix. You can buy a replacement flexi and have it welded into the downpipe though.
     
  4. OldRedEyes

    OldRedEyes Member

    445
    0
    16
    it's a fwd
     
  5. Oranoco

    Oranoco Well-Known Member

    3,734
    336
    83
    My flexi failed after my local PowerFlow dealer made a total Horlicks of removing my centre box (despite me standing under the car and telling them ho wit needed to be done :( ). They kindly offered to empty my wallet to the tune of £100 for the damage THEY caused, oddly I declined and figured if it was going to cost me I'd be damned if the money would line their incompetent pockets. Another place local to me did the repair all in for £80 and it was a tidy job they did. Was still good when I finally changed the mess that PowerFlow called an exhaust and I fitted the Milltek
     
  6. Jason.s

    Jason.s Active Member

    2,879
    348
    38
    New downpipe is £99.04 inc vat gasket is £6.40 inc vat.

    Providing its a manual i pressume?
     

Share This Page