1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A4 tdi standard exhaust tips cut and replaced with s4 or twin tips help

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by ruairi83, Dec 14, 2013.

  1. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 14, 2013]
    Has anyone cut the standard a4 b7 tdi single exit twin tips and put s4 tips onto one side? Can't find pictures anywhere.


    I don't want the valance with two single pipes as a lot about I want to just cut my ones and put a straight twin exits to my one... But can't find good twins that will look nice.


    Any pictures or advice would be great. Thanks
    #1
  2. lynallbel
    Offline

    lynallbel Active Member

    Joined:
    Oct 9, 2013
    Messages:
    395
    Likes Received:
    36
    [Dec 14, 2013]
    Probably best to go to a custom exhaust place and get some nice stainless ones made, the ones you can buy will probably look a bit chavvy as they are going to be designed for a certain type of bod!
    #2
  3. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 14, 2013]
    already went to a place and they told me to get tips online and they will weld on but can't find any s4 tips that have a slant. Just universal ones that don't look as good as I want mate.
    #3
  4. V6 Quatt
    Offline

    V6 Quatt Well-Known Member

    Joined:
    Feb 29, 2008
    Messages:
    1,051
    Likes Received:
    224
    [Dec 15, 2013]
    Depending on where you are located...Torqueflow in Birmingham do that kind of Mod with loads of choices too.

    #4
  5. Arnie013
    Offline

    Arnie013 Member

    Joined:
    Jun 22, 2012
    Messages:
    148
    Likes Received:
    13
    [Dec 24, 2013]
    If you don't want to replace the whole exhaust have a look at these on fleabay. 161050056325 It's what I'm considering if I don't go full stainless. One on each side should look quite tasty!
    #5
  6. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 24, 2013]
    Sorry for late reply and that's for writing in. I'm in Northern Ireland so only a few good custom exhaust places near me.

    I've been watching those tips on eBay and the exhaust guy near me said to get them and we will weld them on.

    But to be honest I wanted the shape of the s4 tips as they suit it very well and look oem rather than jut weld on and not look oem...

    I'm
    Surprised no-one as pictures or has done this on here...
    #6
  7. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 24, 2013]
    Here's back of my car Im only after one side not both...
    [​IMG]
    #7
  8. Arnie013
    Offline

    Arnie013 Member

    Joined:
    Jun 22, 2012
    Messages:
    148
    Likes Received:
    13
    [Dec 24, 2013]
    Fair one mate. I'm a fan of the OEM look too however i do like the look of those tips. Luckily I "could" weld them on myself. Just need somewhere to do it as garage is full of gumf at the moment. Also. Unrelated but where did you get those lights? Exactly what I'm looking for, if they're fk ones did you have any dramas with the wiring? Cheers pal.
    #8
  9. DieselJake
    Offline

    DieselJake God Mode

    Joined:
    Jun 14, 2012
    Messages:
    2,042
    Likes Received:
    353
    [Dec 24, 2013]
    What are the prices like at this place? Checked the site out which has loads of new Mercedes on the home page and expensive cars all over which was a bit off putting, especially seeing as they're in Small Heath haha. Think mine's having the turbo back treatment with a couple silencers to appease the neighbours.
    #9
  10. Matt10160
    Offline

    Matt10160 Member

    Joined:
    Jul 5, 2013
    Messages:
    145
    Likes Received:
    14
    [Dec 25, 2013]
    image.jpg

    These are from an A6 cut the tips off and welded the new tips to my current exhaust, ebay bargain £6.00 :)
    #10
  11. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 25, 2013]
    Lights are dectane light with no issues fitting and I put led reverse bulbs in no probs at all and are a 15min to fit them.
    #11
  12. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 25, 2013]
    They look a good job mate must keep and eye out on the bay for these.cheers

    would you have anymore pics of the back of the car mate ...
    Last edited: Dec 25, 2013
    #12
  13. T3nnant
    Offline

    T3nnant Active Member

    Joined:
    Jan 7, 2013
    Messages:
    403
    Likes Received:
    72
    [Dec 25, 2013]
    Don't happen to have the link for the reverse bulbs do you? Iv bought 2 sets now and both have been promised to be canbus free but never seem to work!
    #13
  14. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 25, 2013]
    #14
  15. Arnie013
    Offline

    Arnie013 Member

    Joined:
    Jun 22, 2012
    Messages:
    148
    Likes Received:
    13
    [Dec 25, 2013]
    Thanks mate. Shall have a butchers. Where you get them from if you don't mind me asking?
    #15
  16. Matt10160
    Offline

    Matt10160 Member

    Joined:
    Jul 5, 2013
    Messages:
    145
    Likes Received:
    14
    [Dec 25, 2013]
    Iv just put pics in the show us pocs of your a4/s4 thread!
    #16
  17. ruairi83
    Online

    ruairi83 Well-Known Member

    Joined:
    Dec 28, 2007
    Messages:
    1,079
    Likes Received:
    196
    [Dec 26, 2013]
    @matt cheers mate great mod

    @ arnie got them on eBay second hand for £120 but they where great condition and very easy to fit. Anyone any other pics of exhaust welded on or full stainless.
    #17
  18. Macdoon
    Online

    Macdoon Well-Known Member

    Joined:
    Jan 20, 2010
    Messages:
    1,679
    Likes Received:
    361
    [Dec 26, 2013]
    A set of 3" Milltek tips welded on
    [​IMG]
    [​IMG]
    [​IMG]
    #18
  19. T3nnant
    Offline

    T3nnant Active Member

    Joined:
    Jan 7, 2013
    Messages:
    403
    Likes Received:
    72
    [Dec 26, 2013]
    thanks, much appreciated!
    #19

Share This Page