A4 tdi standard exhaust tips cut and replaced with s4 or twin tips help

ruairi83

ruairi83

Registered User
Joined
Dec 28, 2007
Messages
1,851
Reaction score
618
Points
113
Location
Garage
Has anyone cut the standard a4 b7 tdi single exit twin tips and put s4 tips onto one side? Can't find pictures anywhere.


I don't want the valance with two single pipes as a lot about I want to just cut my ones and put a straight twin exits to my one... But can't find good twins that will look nice.


Any pictures or advice would be great. Thanks
 
Probably best to go to a custom exhaust place and get some nice stainless ones made, the ones you can buy will probably look a bit chavvy as they are going to be designed for a certain type of bod!
 
lynallbel said:
Probably best to go to a custom exhaust place and get some nice stainless ones made, the ones you can buy will probably look a bit chavvy as they are going to be designed for a certain type of bod!
Click to expand...

already went to a place and they told me to get tips online and they will weld on but can't find any s4 tips that have a slant. Just universal ones that don't look as good as I want mate.
 
Depending on where you are located...Torqueflow in Birmingham do that kind of Mod with loads of choices too.

ruairi83 said:
already went to a place and they told me to get tips online and they will weld on but can't find any s4 tips that have a slant. Just universal ones that don't look as good as I want mate.
Click to expand...
 
If you don't want to replace the whole exhaust have a look at these on fleabay. 161050056325 It's what I'm considering if I don't go full stainless. One on each side should look quite tasty!
 
Sorry for late reply and that's for writing in. I'm in Northern Ireland so only a few good custom exhaust places near me.

I've been watching those tips on eBay and the exhaust guy near me said to get them and we will weld them on.

But to be honest I wanted the shape of the s4 tips as they suit it very well and look oem rather than jut weld on and not look oem...

I'm
Surprised no-one as pictures or has done this on here...
 
Fair one mate. I'm a fan of the OEM look too however i do like the look of those tips. Luckily I "could" weld them on myself. Just need somewhere to do it as garage is full of gumf at the moment. Also. Unrelated but where did you get those lights? Exactly what I'm looking for, if they're fk ones did you have any dramas with the wiring? Cheers pal.
 
V6 Quatt said:
Depending on where you are located...Torqueflow in Birmingham do that kind of Mod with loads of choices too.
Click to expand...

What are the prices like at this place? Checked the site out which has loads of new Mercedes on the home page and expensive cars all over which was a bit off putting, especially seeing as they're in Small Heath haha. Think mine's having the turbo back treatment with a couple silencers to appease the neighbours.
 
Image

These are from an A6 cut the tips off and welded the new tips to my current exhaust, ebay bargain £6.00 :)
 
Arnie013 said:
Fair one mate. I'm a fan of the OEM look too however i do like the look of those tips. Luckily I "could" weld them on myself. Just need somewhere to do it as garage is full of gumf at the moment. Also. Unrelated but where did you get those lights? Exactly what I'm looking for, if they're fk ones did you have any dramas with the wiring? Cheers pal.
Click to expand...

Lights are dectane light with no issues fitting and I put led reverse bulbs in no probs at all and are a 15min to fit them.
 
ruairi83 said:
Lights are dectane light with no issues fitting and I put led reverse bulbs in no probs at all and are a 15min to fit them.
Click to expand...

Don't happen to have the link for the reverse bulbs do you? Iv bought 2 sets now and both have been promised to be canbus free but never seem to work!
 
ruairi83 said:
They look a good job mate must keep and eye out on the bay for these.cheers

would you have anymore pics of the back of the car mate ...
Click to expand...

Iv just put pics in the show us pocs of your a4/s4 thread!
 
@matt cheers mate great mod

@ arnie got them on eBay second hand for £120 but they where great condition and very easy to fit. Anyone any other pics of exhaust welded on or full stainless.
 
You must log in or register to reply here.

Similar threads

jamiegdhll
A4 B7 2.0TFSI S4 EXHAUST TIPS *HELP*
Replies
5
Views
2K
ultramodz
U
J
Exhaust tips
Replies
4
Views
786
Beardymat
Beardymat
Dani_B19
Exhaust tips.
Replies
15
Views
1K
Dani_B19
Dani_B19
Macdoon
Exhaust tips
Replies
0
Views
897
Macdoon
Macdoon
alpesh26
Exhaust Tips
Replies
3
Views
1K
alpesh26
alpesh26
Top
Back