1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

a few progress pics of the bt

jim s3 Jul 27, 2008

  1. jim s3

    jim s3 Member

    321
    0
    16
    im still not sure every one has a milltek plus its not the best pic of the supersprint
     
  2. Prawn

    Prawn My other car is a MINI!!!!

    11,667
    3,668
    113
    I personally prefer the twin pipes too, the problem with the oval is it's so clearly just an image thing, as you can see the small round hole in the middle!
     
  3. jim s3

    jim s3 Member

    321
    0
    16
    still cant believe the price lol[​IMG]
    [​IMG]
    Supersprint Race System - Audi A3 S3 1.8T Quattro '99 -> '02Price (incl. VAT): £1,774.63 [​IMG]Supersprint Race System - Audi A3 S3 1.8T Quattro '99 -> '02

    Manifold back system consisting of 2-1 Y pipe (removes standard catalysts), centre pipe containing high flow metallic catalyst and lightweight rear silencer with single 145 x 95mm oval tailpipe.

    Internal pipe diameter = 70mm

    You must extend lambda sensor position

    Supersprint codes: 325512 + 325403 + 325505


    [​IMG]
     
  4. Prawn

    Prawn My other car is a MINI!!!!

    11,667
    3,668
    113
    christ that's a fair chunk of cash for an exhaust!

    How much did you pay for it mate?
     
  5. jim s3

    jim s3 Member

    321
    0
    16
    cant say just in case i sell it on but it wasnt that much
     
  6. S3Steve

    S3Steve Active Member

    1,621
    20
    38
    That price cant be right, my mate paid £650 iirc from Jabba for his, his was from the CAT back but the cat replacement pipe cant be £600.
     
  7. jim s3

    jim s3 Member

    321
    0
    16
    i though that to, i aint got the decat part but i have the cat on the middle pipe and the sensor thats os the supersprintuk site
     
  8. S3Steve

    S3Steve Active Member

    1,621
    20
    38
    Is it the one that went on ebay a couple of weeks back? :rolleyes: If so it was a good price mate
     
  9. S3Steve

    S3Steve Active Member

    1,621
    20
    38
    My mate had the straight through centre section so that might account for it, still £1100 more to have a cat in the centre section and the front pipe is bloody steep!
     
  10. jim s3

    jim s3 Member

    321
    0
    16
    no but i did see that one my work mate was selling his s3 and had it on so i swapped my standard box and a couple of quid for it going to cut the cat out and make it straight through i think
     
  11. jojo

    jojo Looking for Boost! Staff Member Moderator Team Daytona Audi S3 quattro Audi A6 Audi Avant Owner Group

    28,998
    3,652
    113
    Does that mean you have a spare Milltek lying around? :)
     
  12. jim s3

    jim s3 Member

    321
    0
    16
    it does but not sure which one to put on so i might have a spare supersprint
     
  13. James333

    James333 Member

    229
    1
    18
    do they supply the carling can to hold it on too? :eek:)

    Looks awesome, will you be posting videos? I have been watchin a lot of 20v build threads, all amazing but lacking one thing.........Quattro! 450-500bhp is a lot for fwd!
    Cant wait to see and hear it go
     
  14. James333

    James333 Member

    229
    1
    18
    forgot to say, i think the twin pipes look infinitly better, ovals are for vauxhalls :eek:)
     
  15. S3 Rav

    S3 Rav Well-Known Member

    2,825
    30
    48
    twins. yea ovals belong to magnex on vectras!
     
  16. S£

    S£ Member

    684
    0
    16
    Twins all the way to, I think the oval look too chavy on an Audi..
     
  17. Nilz

    Nilz Defo worth the wait :) Team Ibis TFSI Owners Group quattro Audi A4 saloon S-line owners group Manual

    11,367
    908
    113
    Twin pipes dude, pics look good though, and looking forward to seeing the car (in the flesh, when you take me for a spin) ;)
     
  18. edward_harris

    edward_harris s3 gone now a shiney red evo 6

    1,061
    2
    36
    looking good! who are you getting to map it? Just had my evo on the rollers yesterday with the same turbo as you! made 500bhp atf!! although it's coming off next week in space for a gt35r!! I would say tho, when ever i had my s3 mapped i NEVER saw anyone using det cans! im sure they just rely on the knock sensor, which isnt much good after 6500k!
     
  19. S3 GEORGE

    S3 GEORGE GEORGE

    109
    0
    16
    hey jim hows it goin?

    im going 2 put a new turbo on my 2002 s3
    400 brake sounds nice
    not sure what to go for or were to get the parts maby someone could help me?

    Thanks guys
     
  20. jim s3

    jim s3 Member

    321
    0
    16
    its going good mate i used a place called qedpower.com in usa but with the exchange rate how it is not really worth using them....

    i took the car out the other day and i shat myself even with the exhaust not connected and it not being mapped yet its fooking quick.... just thought i would let you guys know lol
     
  21. jim s3

    jim s3 Member

    321
    0
    16
    just posted this to make the 100 posts lol sorry
     
  22. HODD

    HODD Member

    115
    0
    16
    I'd swap my Miltek for a supersprint:)
     
  23. Nilz

    Nilz Defo worth the wait :) Team Ibis TFSI Owners Group quattro Audi A4 saloon S-line owners group Manual

    11,367
    908
    113
    Jimbo...get back to work....LOL, well done on getting the 100 posts.

    What you reckon complete before or after Xmas??
     
  24. S3 GEORGE

    S3 GEORGE GEORGE

    109
    0
    16
    dont you have to pay customs when its set over?
    were will you get it mapped?
    thats the best s3 bt i have seen!
     
  25. edward_harris

    edward_harris s3 gone now a shiney red evo 6

    1,061
    2
    36
    has it been mapped yet jim, whos doing it?
     
  26. thorsy22

    thorsy22 Member

    308
    0
    16
    I thinking of doing something like this over the next year so very interested to know how its going!
     
  27. jim s3

    jim s3 Member

    321
    0
    16
    im just saving up for a map now think im going to go with unitronic now as i have nearly the same set up as a seat ibiza and they are saying i could get over 500bhp from my set up so im saving hard lol very hard......

    also solved my non starting issue it was my denso iridiums not wanting to spark so put my old ngk ones back in and started first time...

    so its the car is just sitting im my garage waiting for the ecu to be sent to america to be mapped also been polishing bit and bobs in the engine bay making everythink shiney:p
     
  28. Prawn

    Prawn My other car is a MINI!!!!

    11,667
    3,668
    113
    are you not having a custom map then Jim? surely something so unique needs specific mapping? not just something generic to the type of turbo?
     
  29. Nilz

    Nilz Defo worth the wait :) Team Ibis TFSI Owners Group quattro Audi A4 saloon S-line owners group Manual

    11,367
    908
    113
    Woohoo, sounds good, looks like you are getting there, slowly but surely hey??
     
  30. HTC

    HTC Active Member

    3,428
    9
    38
    Nick, Unitronic can make a map to your requirements over the phone or email and send you a reprogrammed ECU. They are producing excellent maps at the moment. Just tell them the turbo spec and injectors you want to use. MAF-less option is a winner. Gets rid of a weak point.
     
  31. jim s3

    jim s3 Member

    321
    0
    16
    spoke to them and got excited won't be to long boys going to new job Monday with more money per week so give me a few weeks..
     
  32. Nilz

    Nilz Defo worth the wait :) Team Ibis TFSI Owners Group quattro Audi A4 saloon S-line owners group Manual

    11,367
    908
    113
    Good luck with the new job mate, where you going to be based now and what you doing????
     
  33. Shy19s

    Shy19s Oil running through my veins.

    886
    1
    16
    wow, jim i want your car.
     
  34. edward_harris

    edward_harris s3 gone now a shiney red evo 6

    1,061
    2
    36
    mate i really think you should get it mapped over here in the car! you will get better power and it will be alot better map!
     
  35. jim s3

    jim s3 Member

    321
    0
    16
    still working for same company but the further we work from home the more money we get.......im working on nottingham prison as from monday building the new block cant wait lol
     
  36. SDO

    SDO Member

    153
    0
    16
    please make it secure i'm from nottingham
     
  37. S3BLX

    S3BLX Member

    339
    0
    16
    ask if they need any electricians jim
     
  38. jim s3

    jim s3 Member

    321
    0
    16
  39. HTC

    HTC Active Member

    3,428
    9
    38
    You got software or is that the stock tuning?

    Nice to see it running!
     
  40. jim s3

    jim s3 Member

    321
    0
    16
    stock
    well revo remap but not for this set up
     

Share This Page