- Joined
- Feb 13, 2015
- Messages
- 54
- Reaction score
- 9
- Points
- 8
found a forum on here about having tpms reset in the dis without a physical button
I have followed all the guides on here and still struggling to get it working
Car is 2009 s3
I have 1AT in the sticker in the boot as suggested
My abs controller is 1K0 907 379 AP
Instrument cluster accepts security and allows the +16 change which brings the light on the dash and error in dis
When I go to adaptions block 37 shows 0 and will only let me input two digits (I have tried 11 and all other combinations)
Anyway with 11 accepted I got to 03 ABS and long coding
Byte 16 Bit 1 isn’t there but bit 2 is
Byte 17 bit 2 is there but when clicked controller says out of range
Can gateway accepts 4c selection
Am I doing something wrong
Thanks in advance
Sent from my iPhone using Tapatalk
I have followed all the guides on here and still struggling to get it working
Car is 2009 s3
I have 1AT in the sticker in the boot as suggested
My abs controller is 1K0 907 379 AP
Instrument cluster accepts security and allows the +16 change which brings the light on the dash and error in dis
When I go to adaptions block 37 shows 0 and will only let me input two digits (I have tried 11 and all other combinations)
Anyway with 11 accepted I got to 03 ABS and long coding
Byte 16 Bit 1 isn’t there but bit 2 is
Byte 17 bit 2 is there but when clicked controller says out of range
Can gateway accepts 4c selection
Am I doing something wrong
Thanks in advance
Sent from my iPhone using Tapatalk