S5 intake flap problem

[Shocker]

hi
Was having trouble with 2 fault ccodes saying insufficient air intake bank 1 and bank2
What I found was the lever on the front of the manifold was jamming up when I turned of the engine
If I pushed it down the codes went away
Problem now is I pressed to hard and snapped off the lever at the Motor
I now need to know what the open position is so I can tie the flap in the open position until I get the new motor
Picture is not of my car but a new manifold
Is the picture in the closed or open position
The other position is the lever goes to about 1 o’clock
What is open so I can tie it in that position

 

[Shocker]

This is the other position anyone know what is the open position when the car goes above 5000 rpm
When running normal below 5000 rpm it is as this photo
And I think it pulls the lever down over 5000 rpm
Someone must be able to confirm because I don’t want to tie it in the closed position and strangle the car Top end