Address 20: High Beam Assist. (J844) Labels:| 8X0-857-511.clb
Part No SW: 8X0 857 511 AA HW: 8X0 857 511 AA
Component: FLA H03 0005
Revision: AA001001
Coding: 02020E64747464545425363E00
Shop #: WSC 00046 412 00000
ASAM Dataset: EV_HighBeamAssisAU210 001019
ROD: EV_HighBeamAssisAU210.rod
VCID: 7DA60C4C7D77E772445-8028
No fault code found.
I don't have it but I believe you have to have the high beam stalk set to on and then it activates over a certain speed - it's in the manual if you got one with the car?Cheers both. With the lights in both Auto and manually switched to dipped-beam, I didn't get the A icon beside the blue high-beam icon on the clock.
An autoscan showed no faults - shall I remove the hardware from the gateway and re-add it?
Code:Address 20: High Beam Assist. (J844) Labels:| 8X0-857-511.clb Part No SW: 8X0 857 511 AA HW: 8X0 857 511 AA Component: FLA H03 0005 Revision: AA001001 Coding: 02020E64747464545425363E00 Shop #: WSC 00046 412 00000 ASAM Dataset: EV_HighBeamAssisAU210 001019 ROD: EV_HighBeamAssisAU210.rod VCID: 7DA60C4C7D77E772445-8028 No fault code found.
The car has a manual for an A3, not an A1! I imagine the systems are very similar, but I’m on the hunt for a proper manual.I don't have it but I believe you have to have the high beam stalk set to on and then it activates over a certain speed - it's in the manual if you got one with the car?