i know this has probably been ask so many times but can't seem to find what I'm looking for and need help with wheels I'm after a new set in particular the OZ Racing Superturismo LM In 18" or 19" but I'm unsure on fitments offsets etc can anyone help and please these are the wheels and fitments I think they would be
Wheel help please
- Thread starter junko
- Start date
Flying Scotsman
Registered User
The OEM ET for 19'' is 49 and 18" range from 43 to 46 for 2013 to present A3/S3 vehicles....therefore no issue with that wheel, just make sure you get the correct concentric rings and lug bolts which are usually tapered for non OEM wheels.
Last edited:
Thanks for the feedback will these come with the concentric rings etc I've seen these from demon Tweeks the photo above is the spec I chose will they not fit as you said about the et range
Flying Scotsman
Registered User
You will have to ask the supplier or installer if they supply the correct concentric rings to fit the Audi hub. The lug bolts are very important as AUDI OEM are radius and do not fit those bolts on most aftermarket wheels, you will need tapered. As I stated before the ET is fine on those OZ wheels, as is the PCD
Ok thanks again for the help is there any links available for me to buy the rings and bolts as I may need to buy them myself
