I'm in the US. Apparently there's a service in the UK that will refurb the controllers. The price seems reasonable, I just expect shipping to take a while each way which isn't the most convenient.
I'm wondering if anyone knows how exactly they bench test them and refurb them? I'm fairly handy with a soldering iron and multimeter.
I have an 07 A3, so that's the Gen 2 controller. I'm getting intermittent codes:
01324 - Control Module for All Wheel Drive (J492)
013 - Check DTC Memory - Intermittent
01073 - Clutch Pressure System
002 - Lower Limit Exceeded - Intermittent
00448 - Haldex Clutch Pump (V181)
014 - Defective - Intermittent
The pump and clutch appear to work correctly when I run an output test with VCDS. From reading about these errors, it sounds like the problem is most likely in the control module.
Thanks for any help!
I'm wondering if anyone knows how exactly they bench test them and refurb them? I'm fairly handy with a soldering iron and multimeter.
I have an 07 A3, so that's the Gen 2 controller. I'm getting intermittent codes:
01324 - Control Module for All Wheel Drive (J492)
013 - Check DTC Memory - Intermittent
01073 - Clutch Pressure System
002 - Lower Limit Exceeded - Intermittent
00448 - Haldex Clutch Pump (V181)
014 - Defective - Intermittent
The pump and clutch appear to work correctly when I run an output test with VCDS. From reading about these errors, it sounds like the problem is most likely in the control module.
Thanks for any help!