Hello
I replaced the Coolant Temp Sensor last week on my A4 2.0 Petrol engine and the 16500 Engine Coolant Temp. Sensor (G62): Implausible Signal code went, yet the 17700 Map Controlled Engine Cooling Thermostat (F265): Open Circuit remained
It's been a few days now and the temp gauge is working fine but when I scanned it again this morning the 17700 code is still there and the 16500 code has come back!!!!
I've cleared the codes and re-fitted the new temp sensor and this has made NO difference. I only have a basic scanner (U281 OBD-2 CAN-BUS Code Scanner) but I can still erase codes etc and don't have any issues with stubborn codes if I've replace the part/sensor in question
So i'm a bit stuck as to what is going on with it and why these two codes are being so stubborn, any ideas?!
I replaced the Coolant Temp Sensor last week on my A4 2.0 Petrol engine and the 16500 Engine Coolant Temp. Sensor (G62): Implausible Signal code went, yet the 17700 Map Controlled Engine Cooling Thermostat (F265): Open Circuit remained
It's been a few days now and the temp gauge is working fine but when I scanned it again this morning the 17700 code is still there and the 16500 code has come back!!!!
I've cleared the codes and re-fitted the new temp sensor and this has made NO difference. I only have a basic scanner (U281 OBD-2 CAN-BUS Code Scanner) but I can still erase codes etc and don't have any issues with stubborn codes if I've replace the part/sensor in question
So i'm a bit stuck as to what is going on with it and why these two codes are being so stubborn, any ideas?!
Last edited: