Quick AMK S3 MAF Question..

[Stuart B]

So can a MAF be faulty without any error codes - or obvious running issues?

Just wondering whether it is worth considering replacing whilst GSF have a 53% discount (WKD53) (although same price as ebay etc but at least I can take it back)

I have no error codes appearing and the car was working okay before going onto Axle Stands (I say okay about 200 g/s) I am doing the FMIC over the coming days (hopefully) so would consider this at the same time.

Thanks

 

[desertstorm]

MAF's usually go faulty without raising any direct codes with the MAF itself. They usually start to read low when failing. Make sure it's a Bosch or Pierburg item, There are loads of fakes around on Ebay so you never quite know what you are buying sometimes.

http://www.carparts4less.co.uk/cp4l...anagement/engine-management-sensor/?434440217 £80.66 if you use cp10less and you will get back £23 when you return your old item

same item in ECP with 55% discount works out at £91.40 and you get back £24 .

 

[Stuart B]

ah okay thanks - so essentially a service part

 

[Rainbird]

Be aware that a number of people have had issues with non-genuine MAFs so the usual advice is to avoid those from anywhere but a dealer or known good used part.