- Joined
- Oct 26, 2015
- Messages
- 287
- Reaction score
- 39
- Points
- 28
Hey guys ive decided to take the plunge and go for a GT28 setup, ive looked at different variations and have settled on this:
Compressor
Trim 48
Inducer Diameter 49.20 mm
Exducer Diameter 71 mm
A/R 0.60
Turbine
Trim 76
Inducer Diameter 53.8mm
Exducer Diameter 47 mm
A/R 0.64
Apparently this should flow up to 400bhp but im not chasing numbers.
Only parts i still need to find are silicone joiners to connect the compressor inlet to the tip and outlet to the charge pipe, and a EGT probe boss.
Could someone plz confirm the charge pipe diameter for me, and if you know what thread and pitch boss i need that would be awesome.
Cheers
Compressor
Trim 48
Inducer Diameter 49.20 mm
Exducer Diameter 71 mm
A/R 0.60
Turbine
Trim 76
Inducer Diameter 53.8mm
Exducer Diameter 47 mm
A/R 0.64
Apparently this should flow up to 400bhp but im not chasing numbers.
Only parts i still need to find are silicone joiners to connect the compressor inlet to the tip and outlet to the charge pipe, and a EGT probe boss.
Could someone plz confirm the charge pipe diameter for me, and if you know what thread and pitch boss i need that would be awesome.
Cheers