10" wide wheels

[vr6gordy]

Dose anyone no or run 10" wide wheels on a a4 cab on here ??

 

[J14hob]

I've got 10s on the rear but a avant not cab

 

[vr6gordy]

Just I'm lookin at some new wheels vossen 303

 

[J14hob]

That's how mine fit et42 but 10 MM spacers so et32 really and 235 35 tyres

 

[vr6gordy]

So it might be possible even to get a 10.5 wide wheel in then if I can find the right et

 

[J14hob]

I've had to roll my arches

 

[J14hob]

But could get wider wheels I reckon

 

[vr6gordy]

How much space is there before it hits anything on the inside ??

 

[DrStrange]

And I thought running 9'' wheels on my cab was enough. 10'' are so wide.

Have seen an orange RS4 B7 floating around the internet on 10'' wide wheels and even they looked a bit much..even with the extended arches.

Im running 265 tyres on my 20x9 wheels now. To give you an idea on your above question..the width of the tyres are perfectly flush with arches but do rub when going over bumps at over 20mph.

Running 235's on a 10'' wheel is actually unbelievable. I had quite severe stretching when running 235's on 20x9. So i assume you're on 19's J14hob?

 

[J14hob]

Yeh got 19s I don't think the stretch is to bad seen a lot more with people running smaller wheel

 

[J14hob]

I'll try and get a picture

How much space is there before it hits anything on the inside ??

 

[DrStrange]

Jeez..thats interesting.

Yes please, do provide a pic if you can.

 

[mattyb6]

I ran 10j with adapters but can't remember the et, little bit poke.

I flared the rear arches a little too

 

[D9n dk]

it all depends on the offsets of the wheels your looking at buying smaller the offset the more the wheel sits out from the hub

if you know your original wheel specs and you know your new wheel specs try this

https://www.1010tires.com/Tools/Wheel-Offset-Calculator

 

[J14hob]

Had a look earlier the inside of the wheel is about 10mm away from the coilovers