Brembo Identification Help

[lorryz]

Hi All, The time has come to replace my rotors and pads. I just need some help Identifying what gear I have bolted to the car, as I cant track down any identification numbers.

As far as I can tell, I have a Brembo GT JR Kit with single bleed nipples? And 330mm x 25mm rotors.

And am i right in assuming I need to order 330mmx28mm 5x100 discs ?

 

[lorryz]

Hmm upon further digging, it appears that Brembo also makes a 328x28mm rotor. So i guess its best i find the part number.

Does anyone know where one might typically find the ID number on a brembo kit ?

This looks like it could be part of the caliper ID, but before I get the Dremel out and strip the paint, is there a spot on the disc that I overlooked ?

 

[lorryz]

Ok, so after further internet trawling. I've come to the conclusion that i do indeed have the brembo jr kit, and my measuring probably sucks.

Its most likely I have USR1338 Ultimax 323x38mm disc's fitted, and therefore any LCR 323mm disc (or pad) should fit.

I just wish I found this info, before I bothered with this thread.

 

[Stuart B]

it certainly wont be "323x38mm" that would mean you wore down 13mm 323x28mm maybe

 

[lorryz]

it certainly wont be "323x38mm" that would mean you wore down 13mm 323x28mm maybe

Ah yes 323x28mm. you knew what i meant, cheers