I think I want to stick with just springs for now, can't decide between H & R, Eibach or VWR. Sure they are all much the same. Ah the days of owning an R32. The S3 will never sound as good!
I think you can still get them, however I might be interested if you were selling them. Do you know the offset of yours and are they 8.5"?
Probs my try something different to gtech this time, gyeon maybe
Cheers for the offer though
Finally some pics
Finally some pics
Thanks for the size info. Are they quite flush with the arches? I'm not keen on the sticky out look! 10.5!! that's some wheel on an S3, would be interested to see if you can get them to fit.I wont know if ill be changing them until I take my CLS wheels off and try them on the Audi to see how 10.5's will work and what will need doing for them to go on...ill keep you in mind if things change but wont be for a while yet
Yes these are 8x5 ET45
still got my set of wheels in this same design, bola zzrs, yet to see how they look on my s3Finally some pics
Washed her after almost a month and I was really impressed with the CP Hydro Lite results. The Snowfoam simply didn't want to cling on no matter what and beading afterwards was topclass. Used BH Snowfoam mixed with BH Surfex HD and warm water. Washed her with CarPro Reset and then applied Gyeon Cure followed by a single coat of Fusso99 as well. Overall, pretty chuffed with the results. Pics FYI
Before:
After:
Sent from my iPhone using Tapatalk
Took a vid of the milltek. Shame the car doesn't rev past ~3800rpm .
Some people will call me crazy, but I bought fake leather seat covers to cover my rear leather seats and got them installed
I'm driving a lot with my dog based on a rear seats, so I don't want new beautiful seats to be damaged from claws, dirt or dog hair. I just can't let my dog jump over those new seats ))) Look how new and beautiful they are, it would be a crime to damage them
I tried couple of those rear seat protectors for dogs, but I find them pretty impractical in terms of hair cleaning. Also rear passengers have troubles to ride with me with those installed in the back. So I decided to buy rear covers for my leather seats)) I ordered those from Russia and they worth every penny. They cost me 111$ for a whole set of four seats covers, but I only used covers for rear ones. This is a custom fit for A3 8v. So they fit pretty well even in sedan.
Had to remove lower rear seat bench and a middle safety belt to install them, but in my opinion they fit nicely. The only issue I found is the absence of a hole for small storage box under rear seats and holes for middle head rest.
I really like how they feel and fit. My seats are now protected from dirt, claws and hair. They can be easily cleaned with wipes and vacuum cleaner with no need to disassemble And they don't even look that bad My doggo is now happy with her's new seats since they don't move all around Also I bought some fake leather floor mats from China to simplify dog hair floor cleaning process. Doesn't fit perfectly, but does the job done The car is now Dog-proof
Installed a Clearmounts phone holder today. Took 2 minutes to install and no tools needed.
Really good product and highly recommend it: https://www.audiphoneholder.com
Before:
View attachment 157913
After:
View attachment 157914
View attachment 157915
View attachment 157916
View attachment 157917
I'm been thinking of getting one of these.
Is your the Swivel magnetic holder or the Low-Profile one? Also how long did delivery take?
As I told, git them from Russia with help of my friend. Cost me 110$ for whole set for front and rear seats including headrest covers and armrest. But I used only rear seat covers)That actually not that bad looking....where did you get them from and how much?
@Tom.H very nice.. I just tried to get the tips off again, got one off. Can't budge the others what a nightmare they are!
My car is currently on stands as powered the rear exhaust area to blow some air around the valve motors.
Great work. I see they all have the same part number - interesting as I’ve read they are handed, but obviously not!Cleaned up the tips after taking them off earlier, not perfect by any means as they're pitted but 100% better than they were.
Great work. I see they all have the same part number - interesting as I’ve read they are handed, but obviously not!
My bad...your correct. ThanksNope, 2 x 8V0 253 826C (right hand side) and 2x 8V0 253 825C (left hand side)
My bad...your correct. Thanks
Installed a Clearmounts. Took me 5 mins, probably the easy done on my car so far.
View attachment 158465